F150online Forums

Lightning

Belt Size question...

   
Old Apr 4, 2005 | 10:07 PM
Share
  #1  
QWIK 150's Avatar
Thread Starter
|
Senior Member
Joined: Jun 2003
Posts: 394
Likes: 0
From: Philadelphia, PA
Belt Size question...
I do not remember what size I need for a 6# lower.
 
Reply
0
Old Apr 4, 2005 | 10:25 PM
Share
  #2  
35thPony's Avatar
Suspended
Joined: Aug 2004
Posts: 624
Likes: 0
From: Raleigh, NC
with a 5# and stock upper, I had a 68" and it had some room...
 
Reply
0
Old Apr 5, 2005 | 12:49 AM
Share
  #3  
Blown347Hatch's Avatar
Senior Member
Joined: Apr 2004
Posts: 1,202
Likes: 0
From: Miami, FL
I have 6lb lower. It's a 68 inch. Almost couldn't get it on.
 
Reply
0
Old Apr 5, 2005 | 08:35 AM
Share
  #4  
tommylightning's Avatar
Senior Member
Joined: Oct 2000
Posts: 846
Likes: 0
From: Hammonton, NJ 08037
Fred,

With your setup I would use a 4080690 belt.
 
Reply
0
Old Apr 5, 2005 | 01:01 PM
Share
  #5  
georgia-SVT's Avatar
Senior Member
Joined: Jan 2003
Posts: 414
Likes: 0
From: Valdosta Ga.
Yep Troyer Performance says 69" they have them for $35.00 cheapest I've found.
jeff
 
Reply
0
Old Apr 5, 2005 | 04:37 PM
Share
  #6  
35thPony's Avatar
Suspended
Joined: Aug 2004
Posts: 624
Likes: 0
From: Raleigh, NC
no way a 69"....

68.5" at the biggest
 
Reply
0
Old Apr 5, 2005 | 05:40 PM
Share
  #7  
tommylightning's Avatar
Senior Member
Joined: Oct 2000
Posts: 846
Likes: 0
From: Hammonton, NJ 08037
Originally posted by 35thPony
no way a 69"....

68.5" at the biggest
He has the Metco idler kit also.
 
Reply
0

Trending Topics

Old Apr 5, 2005 | 06:27 PM
Share
  #8  
35thPony's Avatar
Suspended
Joined: Aug 2004
Posts: 624
Likes: 0
From: Raleigh, NC
ahhhh

didn't notice it... 69" def

sorry
 
Reply
0
Old Apr 5, 2005 | 10:28 PM
Share
  #9  
georgia-SVT's Avatar
Senior Member
Joined: Jan 2003
Posts: 414
Likes: 0
From: Valdosta Ga.
O.K. then what size do I need then with just a 6#er. You guys got me worried glade I have not ordered the belt yet.
jeff
 
Reply
0
Old Apr 5, 2005 | 11:27 PM
Share
  #10  
Blown347Hatch's Avatar
Senior Member
Joined: Apr 2004
Posts: 1,202
Likes: 0
From: Miami, FL
Originally posted by georgia-SVT
O.K. then what size do I need then with just a 6#er. You guys got me worried glade I have not ordered the belt yet.
jeff
Dude, it's not that complicated.

JLP sold my my 6lb lower with the belt, my upper pulley is stock, and it's a 68 (exactly) inch belt.
 
Reply
0
Old Apr 7, 2005 | 12:00 PM
Share
  #11  
georgia-SVT's Avatar
Senior Member
Joined: Jan 2003
Posts: 414
Likes: 0
From: Valdosta Ga.
Thanks Blown Troyer showed one thing and then you guys said another. Thanks for clearing that up,
jeff
 
Reply
0
Old Apr 7, 2005 | 12:53 PM
Share
  #12  
thnder's Avatar
Member
Joined: Feb 2003
Posts: 91
Likes: 0
From: Medford, Or / Orange, Ca
Just put one on last night! 69" I have the Metco pulley set up and it just barely went on! There's just about 1/2" of play left on the tentioner.

edit: That's with a 6# JLP lower
 
Reply
0
Old Apr 7, 2005 | 01:00 PM
Share
  #13  
35thPony's Avatar
Suspended
Joined: Aug 2004
Posts: 624
Likes: 0
From: Raleigh, NC
68" with no idler
69" with idler
 
Reply
0
Back to Subforum
Lightning
View Next Unread
Discovered I have 4# pulley


Thread Tools
Search this Thread
Search this Thread:

Advanced Search

Advanced Search

All times are GMT -4. The time now is 05:27 AM.