What size are the Snout bolts?
Senior Member
Joined: May 2001
Posts: 3,300
Likes: 0
From: Richmond, VA, USA
M8 x 45mm length
(1.25 thread pitch)
I used hex (allen) head stainless, but I think SVTRobG got some cool looking 12point stainless or chrome ones at one time, you might check with him.
I could only find 40mm length (too short) and 50mm (too long) locally, so I bought a box of 50mms and cut them down to the correct length.
good luck, hope this helps.
later,
chris
(1.25 thread pitch)
I used hex (allen) head stainless, but I think SVTRobG got some cool looking 12point stainless or chrome ones at one time, you might check with him.
I could only find 40mm length (too short) and 50mm (too long) locally, so I bought a box of 50mms and cut them down to the correct length.
good luck, hope this helps.
later,
chris
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 1,817
Likes: 0
From: Orlando, FL
Thread Starter
|
Senior Member
Joined: Jan 2002
Posts: 1,817
Likes: 0
From: Orlando, FL
