Stopped By JL’s Again
Thread Starter
|
Member
Joined: Jul 2002
Posts: 84
Likes: 0
From: Exton, PA
Stopped By JL’s Again
Stopped by JL's again.......
Stopped by JLP last night and picked up my truck. This past fall we added a KB and many other goodies so about three weeks ago I dropped it off to have a built motor put in it. JL did it up right! I now have a JLP Built Motor, CNC Ported Heads, Stage 3 Cams, 8lb Lower Pulley, MAF X Tender, JLP Afco Heat Exchanger, KB BOOST-A-PUMP, PI 2800 Converter, JLP Polished Valve Covers, A Pillar Gauges – Boost & Fuel Pressure. After all the work it dynoed at 586/650. It is truly a ‘beast’ as Johnny has named it!
No worries now about rods or spitting plugs. Wonder how long my tires will last?
A big thanks to JL and Sue for their great personal service!!
Stopped by JLP last night and picked up my truck. This past fall we added a KB and many other goodies so about three weeks ago I dropped it off to have a built motor put in it. JL did it up right! I now have a JLP Built Motor, CNC Ported Heads, Stage 3 Cams, 8lb Lower Pulley, MAF X Tender, JLP Afco Heat Exchanger, KB BOOST-A-PUMP, PI 2800 Converter, JLP Polished Valve Covers, A Pillar Gauges – Boost & Fuel Pressure. After all the work it dynoed at 586/650. It is truly a ‘beast’ as Johnny has named it!
No worries now about rods or spitting plugs. Wonder how long my tires will last?
A big thanks to JL and Sue for their great personal service!!
Those are very good numbers. Have fun with the new BEAST
Thread Starter
|
Member
Joined: Jul 2002
Posts: 84
Likes: 0
From: Exton, PA
Trending Topics
Senior Member
Joined: Jul 2003
Posts: 967
Likes: 0
From: UNITED STATES OF AMERICA/ LIGHTNING FAST
Re: Stopped By JL’s Again
Originally posted by bobver
Stopped by JL's again.......
Stopped by JLP last night and picked up my truck. This past fall we added a KB and many other goodies so about three weeks ago I dropped it off to have a built motor put in it. JL did it up right! I now have a JLP Built Motor, CNC Ported Heads, Stage 3 Cams, 8lb Lower Pulley, MAF X Tender, JLP Afco Heat Exchanger, KB BOOST-A-PUMP, PI 2800 Converter, JLP Polished Valve Covers, A Pillar Gauges – Boost & Fuel Pressure. After all the work it dynoed at 586/650. It is truly a ‘beast’ as Johnny has named it!
No worries now about rods or spitting plugs. Wonder how long my tires will last?
A big thanks to JL and Sue for their great personal service!!
Stopped by JL's again.......
Stopped by JLP last night and picked up my truck. This past fall we added a KB and many other goodies so about three weeks ago I dropped it off to have a built motor put in it. JL did it up right! I now have a JLP Built Motor, CNC Ported Heads, Stage 3 Cams, 8lb Lower Pulley, MAF X Tender, JLP Afco Heat Exchanger, KB BOOST-A-PUMP, PI 2800 Converter, JLP Polished Valve Covers, A Pillar Gauges – Boost & Fuel Pressure. After all the work it dynoed at 586/650. It is truly a ‘beast’ as Johnny has named it!
No worries now about rods or spitting plugs. Wonder how long my tires will last?
A big thanks to JL and Sue for their great personal service!!
Thread Starter
|
Member
Joined: Jul 2002
Posts: 84
Likes: 0
From: Exton, PA
tlfwatch - JL advised me to break it in through normal driving and change the oil in 1500 miles.
JeffsLightning - The KB has a 3.5 pullley and I'm making about 14-15# of boost. I have limited the WOT as the motor is so new. The idle is different than the original motor. It isn't rough which is what I had expected. I does have a very aggressive rumble to it. I am very pleased. The motor is very smooth. JL balanced the motor and the balance chart shows 0.11 grams and 0.24 grams which is awesome and I expect that has a lot to due with the idle and overall smoothness.
JeffsLightning - The KB has a 3.5 pullley and I'm making about 14-15# of boost. I have limited the WOT as the motor is so new. The idle is different than the original motor. It isn't rough which is what I had expected. I does have a very aggressive rumble to it. I am very pleased. The motor is very smooth. JL balanced the motor and the balance chart shows 0.11 grams and 0.24 grams which is awesome and I expect that has a lot to due with the idle and overall smoothness.
