Your L has become one of my all time favorites... Looks awesome!

 

well... the pinion at rest is 0 degrees... I need to put a 3degree shim in it. One of the things I plan to do the next time I take things apart. I run slapper bars, so the pinion has very little it can actually move at this point, however I still want to correct it.

 

Here is mine with the BellTech 4804 coils up front and JLP 2/3/4 shackles in the rear.

 

93cobra- same question.....how was your pinion angle after lowering the rear ? how did you correct it?

 

my truck is on bags but before i bagged it it was dropped the pics are in my gallerie u get the right pinion angle by adding shims in the rear most kits have them in it.its dirty but its dropped

 

Western Chasis 3" coils up front , 4" shackle + hanger kit out back

 

2" Bell Tech coils up front, 3" rear shackles & modded springs.

 

What size drop in the front?? Also what setting do you have the rear at?? 2, 3 or 4??

 

Here is mine with a Ground Force kit 2/4 drop.



More pics
http://www.cardomain.com/id/jays00lightning

 

How much air do you have in those Nittos!!?? Not busting your chops. I have them too but they don't fill the wheel well that much.

 

Western Chassis coils, a-arms, hanger, shackle on 20's.

 

Hotchkis TVS , Shocks and camber kit

 

HAWT my friend ... SOOOOOO HAWT

 

Who did your suspension ? I'm looking to get mine done locally....

 

Beltech springs and JLP 3" shackles