What's different between these two pictures?

Just got "Christine" back before all the weather hit ...

Check it out !!! This ROXORS ... 438 HP ... no chip, no pulley ...

 

Many thanks to TJ and Jessie ... !!!

 

Giggle Gas?

 

..............a little spray there Cliff???

 

Interesting that you put the feed through the egr I wonder what effect that has with the dispursment of the gas through the intake , being its coming in through a smaller port on the side? Its stealth, though..I'll give you that!

 

Hey, do you think thats safe?Are you using a wet or dry kit?1.7 60' 1/4 12.06 mph 112.73

 

it looks like a wet kit

 

Nice setup!!!!!I bet u cant wait to see some new times.What size shot u hitin it with?

 

What's up with the ET after the question

--Joe

 

75 to start ... The real kit should be available in 3-4
weeks from Holley ... One or two small fitment issues
when they used my truck for a "mule". I love it when
you're the first on the block to try something .... < grin >

Now I need a nitrous tune from Sal !!!

Nitrous, 6 LB -- shoudl hit the 11.xx's pretty easily, huh?

Cliff

 

Wet ... very safe and reliable ... since the EGR is
already there and primed to deliver ... < grin >

 

SVT_KY don't post and split. We have all these questions and no answers. That's a totally awesome stealth set-up. Don't you need a chip with a N20 tune when you're running the giggle gas? What do A/F's look like when spraying?

Come on, we need answers.

 

LOL ... Hokay ...

It has long been postulated that the cheapest way to
high HP is the Nitrous path. So when the opportunity
to be a "mule" for some new stuff that is being developed
for the Lightning (following the 03 Cobra kit setup) I of
course HAD to volunteer ... I think the outcome proves
that for the dollar, the N2O is pretty HP packed.

They did a PEE test to make sure the fuel rails had enough
ummph to support the nitrous, and then the rest is just
stock stuff. EXCEPT for the crazy idea to use the EGR as
the point of injection!!!! That plate is specially designed
for our trucks, and it is really trick ... all billet and stuff.

The fellas at Holley have all the data on all the runs, but
we ended up with just trying up to the 75 HP shot with
all stock everything. No Chip, No Pulley. Base line pulls
were made, and then stepped through all the nozzle sizes
that they wanted to. Because of the S/C, there is a bigger
improvemnt than what the nozzles produce on a regular
N/A motor.

I don't know about the other Nitrous kits, but with this
setup you don't need any special tune or anything. The
air/fuel's were right on the money and punch is unreal.

They had tried another Lightning before, but it didn't pass
the **** test. The two truicks were within 8 HP of each
other on the baseline runs. (Interesting that even with
the vaunted Cobra Watrer Pump, Electric Fan, etc etc. the
difference was statistically null)

The kits should be available to the general public in about
three weeks or so ...

I will post the dyno sheets as soon as I get them scanned.

Cliff

 

Personally I'm afraid of the giggle stuff but it does work...........

PEacE...........................
Jim

 

stealthy