Lightning

Belltech 2" Drop Help!

Thread Tools
 
Search this Thread
 
Old Oct 22, 2004 | 08:37 PM
  #1  
LAGAININ04's Avatar
Thread Starter
|
Member
Joined: Sep 2004
Posts: 71
Likes: 0
From: San Clemente, CA
Question Belltech 2" Drop Help!

OK - just got my Belltech 2" drop shackles and have a few questions. I have an '04 L. I've done a search and there are a ton of posts involving shackles (too much to weed through) so here goes mine:

1) Do I need to have anything else in the rear "redone" or "repositioned" with only the 2" drop.

2) Do I need to have the rear alligned after the install? If so should I wait a week or so for the leafs to settle back?

3) Anyone know of a good shop in South Orange Count, CA. where I can get this done?

Thanks!
Jeff
 
Reply
Old Oct 22, 2004 | 08:44 PM
  #2  
Ron Rairie's Avatar
Senior Member
Joined: Aug 2003
Posts: 525
Likes: 0
From: Spring Texas
It's a 30 minute job in your driveway. Install and you're done!
 
Reply
Old Oct 22, 2004 | 09:12 PM
  #3  
Olddog's Avatar
Junior Member
Joined: Mar 2004
Posts: 5
Likes: 0
From: Nebraska
Yup, it's about a 30 minute job with a good jack and jack stands. I had a vibration (or hum) at 24 mph so I put it back up in the air and rotated the shim under the leaf spring pack. Vibration gone. I am still not level (about 1 inch higher in the rear) but it looks great.
 
Reply
Old Oct 22, 2004 | 09:40 PM
  #4  
Stevoo's Avatar
Member
Joined: Aug 2004
Posts: 40
Likes: 0
From: Northern CA
Yep, what they said

I have this kit on my truck and didn't need to flip or take shims out or do an alignment. I'm VERY happy with the stance.

Steve
 
Reply




All times are GMT -4. The time now is 09:28 AM.