Lightning

Pulling to the right/Popping noise

Thread Tools
 
Search this Thread
 
Old Aug 17, 2004 | 11:55 AM
  #1  
HiPoCP's Avatar
Thread Starter
|
Member
Joined: Mar 2004
Posts: 30
Likes: 0
From: Panama City Beach, FL
Pulling to the right/Popping noise

I have searched all through this forum in my attempt to get rid of the "clunk" heard when turning hard, as in when trying to park. I purchased the clunk washers and installed them. I still have the clunk and the truck is still pulling to the right. Does anyone know of other fixes that will remedy this problem? I'm tired of neighbors stopping what they are doing to see what is making that noise when I am pulling in and out of my driveway...
 
Reply
Old Aug 17, 2004 | 12:13 PM
  #2  
SpeedJunky's Avatar
Senior Member
Joined: Jul 2002
Posts: 513
Likes: 0
From: Downey, CA
Re: Pulling to the right/Popping noise

Originally posted by HiPoCP
I have searched all through this forum in my attempt to get rid of the "clunk" heard when turning hard, as in when trying to park. I purchased the clunk washers and installed them. I still have the clunk and the truck is still pulling to the right. Does anyone know of other fixes that will remedy this problem? I'm tired of neighbors stopping what they are doing to see what is making that noise when I am pulling in and out of my driveway...


It's been discussed a 100x.
 
Reply
Old Aug 17, 2004 | 12:24 PM
  #3  
SlowSVT95's Avatar
Senior Member
Joined: Jul 2003
Posts: 3,891
Likes: 0
From: NJ
Take it back to the dealer. It's still under warranty, no? They fixed mine.
 
Reply
Old Aug 17, 2004 | 02:07 PM
  #4  
HiPoCP's Avatar
Thread Starter
|
Member
Joined: Mar 2004
Posts: 30
Likes: 0
From: Panama City Beach, FL
Like I said in my first post SpeedJunky, I've searched through the forum. Everyone's answer is clunk washers. That didn't work.

Slow - Do you know what they finally did that fixed yours?
 
Reply
Old Aug 17, 2004 | 02:14 PM
  #5  
Twisted99's Avatar
Senior Member
Joined: Jul 1999
Posts: 1,642
Likes: 0
From: South East USA
Grease the steering stops...

I tack welded the washer on the drivers side Lower control arm..

after it was aligned and the camber kit was installed...
 
Reply




All times are GMT -4. The time now is 06:25 PM.