I'm getting ready to install my LFP traction bars. It looks like a pretty straight forward install.

Any tips?

 

Get a cordless angle drill and a cobalt bit. Also check all your bolts and nuts. Mark sent me 4 different thread nuts and bolts.

 

I have some pictures of my instal in my gallery if you wanna check it out. https://www.f150online.com/galleries...w.cfm?num=4836

Josh

 

Thanks guys.

Nice gallery, Josh.

 

 

Blown5, I hate to bust any bubbles but those bars came to the tuner already red, Like myself I thought I was buying a custom spec set of bars from my tuner turns out when I get the box the Rancho stickers were still in the box. By the way I have the same set as yours. I don't mind buying a Rancho product but I DO mind buying something from a tuner and thinking it was custom desined by them only to get the thing in the other companies box! then looking it up online and finding that I could have purchased it for 100$ less. this is not just a T-bar issue it happens to us on a lot of products. but after you have bought the part from the tuner well unless you need two of them your already out the $. Just a rant and to help make some aware of what goes on