New dyno numbers from today
Thread Starter
|
Senior Member
Joined: Sep 2001
Posts: 423
Likes: 0
From: St. Louis
New dyno numbers from today
Had the lightning dynoed today. Here are the number's. The converter was slipping and making the tranny run hot. In all I feel good about the power, but worried about the converter and trans.
Absolute bar. pressure: 29.58 in. Hg.
Vapor pressure: 0.63 in Hg.
Intake air temp: 85.5*F
Correction Factor: 1.02 SAE
A/F: 12.2
HP=500.5
TQ=582.1
Absolute bar. pressure: 29.58 in. Hg.
Vapor pressure: 0.63 in Hg.
Intake air temp: 85.5*F
Correction Factor: 1.02 SAE
A/F: 12.2
HP=500.5
TQ=582.1
Last edited by 415cid Goose; May 19, 2004 at 03:41 PM.
Thread Starter
|
Senior Member
Joined: Sep 2001
Posts: 423
Likes: 0
From: St. Louis
Originally posted by LightningToGo
I would say KB at least and I hope the bottom is built with those numbers.
I would say KB at least and I hope the bottom is built with those numbers.
Trending Topics
Senior Member
Joined: Dec 2001
Posts: 4,081
Likes: 0
From: Dyer, IN
Originally posted by 415cid Goose
Thanks. I was looking for you this past weekend. I parked with all the other lightning. Where did you park.
Thanks. I was looking for you this past weekend. I parked with all the other lightning. Where did you park.
so half the time I wasn't even near my truck......
Senior Member
Joined: Nov 2000
Posts: 1,128
Likes: 0
From: New Mexico
Great numbers 
Our numbers are almost the same, same mods also. I have the stage 2 cams, headwork and Apten.
What boost are you seeing? I run an 8 pound lower. Still with stock headers and cats.
Our numbers are almost the same, same mods also. I have the stage 2 cams, headwork and Apten.
What boost are you seeing? I run an 8 pound lower. Still with stock headers and cats.
