Lightning

Roush suspension kit vs. others

Thread Tools
 
Search this Thread
 
Old May 6, 2004 | 11:39 PM
  #16  
La Larry's Avatar
Junior Member
Joined: May 2001
Posts: 8
Likes: 0
From: Southern CA
Thumbs up

I first lowered my 98 Roush with belltech and bottomed out a lot changed shocks 4 different shocks. I finally put a Roush kit on and was satisfied with the ride. When I bought my Lightening I had SoCal lower it with their kit (rear hangers) and had a slight vibration and replaced it with a Roush Kit. No more vibration. I believe the ride is better than stock. Truck feels tight but not too stiff. I considered Hotchis but played it safe and stayed with Roush. Now I am a happy camper.
LA Larry

My Gallery
http://ftw.truckmoxie.com/mygallery.asp?id=824
 
Reply
Old May 7, 2004 | 12:32 AM
  #17  
Tim Skelton's Avatar
Senior Member
Joined: May 2002
Posts: 4,928
Likes: 1
From: The People's Republic of Los Angeles
All of your answers are a click away.



Way more info than you can get in this thread.
 
Reply
Old May 7, 2004 | 12:34 AM
  #18  
Tim Skelton's Avatar
Senior Member
Joined: May 2002
Posts: 4,928
Likes: 1
From: The People's Republic of Los Angeles
Originally posted by SVT_KY
DREMEL a bit away from the bed support that the Panhard
hits on ... I had the same problem ... With stock hangers back
on, even ... With 2" lowering hangers it would have been worse.
With 1" hangars and Hotchkis leafs, I had to REMOVE the whole bed brace. The only heavy thing that I put in the bed is my motorcycle, and that is on a 1/4" aluminum c-channel.
 
Reply




All times are GMT -4. The time now is 02:08 AM.