I know I haven't even called you guys yet but , I figured why waste you time on the phone it is easier to post my simple ?s

I want to send my Eaton to you guys got a few ?s
Do I get my Eaton back-(Rotors-Case...ect) or is a swap program- I wan't my original parts back is this a problem ?

Do you just send the blower or the upper intake that is attached to blower also ?

Do you supply new gaskets uppon request or do I have to get from dealer/parts store ?

Have there been any fuel issuses with a 4lb lower (injectors/fuel pumps maxing out) ?

What is this new mod you guys were talking about few weeks ago is it part of a new port job or a sepperate part

What is the total cost for the port job with upper intake also and new mod if available (E-mail me if you don't want to post prices I understand)

No super rush on a answer looking to do this sometime in May

My E- mail
Slick0478@aol.com

Thanks
Slick (Craig )

 

TTT
Or anyone else with some of the answers that can be disclosed
Thanks
Slick

 

If you send yours in, that's the one you will get back. We serial number every blower that comes in, and all parts are grouped in the same bin

typically just the blower. we can port the upper for an additional charge, but the gain is not significant for the cost.

We can check on that for you. We always reuse the gasket since it's stainless steel.

no, you are probably okay at that power level. The only concern may be the MAF sensor if you nave a 99-00

The port work is $599 + shipping. If you want the upper ported and matched that's an additional $150.

let us know if you have any other questions. You can also feel free to email us at info@apten-us.com with any questions.

Brian

 

Thanks Brian-Apten Tech
You guys will be hearing from me in early May
Can't wait and thanks for taking the time to answer my questions
obviously on your own time
Thanks Again
Slick-Craig

 

god willing you guys will be seeing mine in may too

-Mike