For all those with ported eatons; I have seen many great looking dyno charts with great HP #'s. But, Does anybody have any good track times? I mean in very similar weather, and you didn't add any other mods?

Reason I ask is I made 439HP 513TQ SAE with my ported blower; well. After two times at the track I still have not seen any increase in ET. If anything it has slowed the truck down; the 60ft is not as good. The MPH is the same, but the ET is off about 1 tenth in the 1/8th.

 

Weather Weather Weather

Nothing effects our times like the weather. If you are making more H/P and TQ what other reason would you have slowed down?


Jerry

 

Must be your FAP (Fake Apten Port)

I'm just pulling your chain, so don't take it wrong

 

see my post "back from the track"

 

Casey

I've been to the track with my "Port Job". Most my runs and times have been on race fuel. When I went to the track, I made all my runs on street fuel and on the "street side" of my chip. Those runs have been as quick and as fast as my best runs on race fuel and race side of the chip. And there is a big difference between the two.

I know this doesn't answer your question, but It does give you an idea where its heading. I will be testing the Apten Ported Blower on race fuel in the near future