If I ported the eaton would I have to get a pully or chip or could I just port the eaton and leave everything else stock.

 

You cpuld do it and then have it dynoed to see if your A/F ratio is still safe. I ran a 4# lower pulley for about 6 months with no chip and no problems.

 

on a stock truck, it should be fine.

I'd check the a/f just to be safe.

I'll need a reburn in the spring becuase my a/f was 12.2 and this will most likely lean it out a little more

 

Check out this company Lighting Force performance
.com, This guy said the gains are 30+hp. I have bought several
products from him, and it`s been great sence.He`s also selling the Badge overlays for the lighting, instead of having Ford on the front of your lighting, why not have lighting/ Svt lighting, or lighting in carbon fiber style on your truck. Check it out.
Lighting Force Performence.com
2001 Black lighting
Helix bore spacer
Boost by pass
6 psi lower pulley
LFP cold air induction system
LFP Super chip
Flow master system
Nizta 20`s rims

 

Yep, Mark is a great guy, and willing to answer any questions. He may not get to you right away cause he is very busy with his home-building company, but he will help you any way he can. I've got his LT's and midpipes going in next week, his 12" filter, bedrug, and 1/2 drop kit. Check out his site, and shoot him an email. Thats the easiest way to get ahold of him.

 

Yes Mark is a Great Guy, I got an Awesome Price on my Accu Fab,
and a special price on my Badge Overlays too
Great Service, Great Pricing, Great Products, what else can one ask for

 

Mark is a great guy. Bought my Bassani from him, but I doubt you'll see 30hp on a stock truck. Iam sure you'll see gains though