Stroker Kits??
Stroker Kits??
Member
Joined: Feb 2002
Posts: 14
Likes: 0
The 5.4 already is a stroked 4.6, like 4.1" of stroke. 3.5" bore. Thats more stroke than most big blocks. You really dont want to stroke it out too much more.
If you have an unlimited buget get the SHM block that is Al and you can bore it to 3.7" so you get 6.0L but the block alone is $4500.
5.4's plenty of CI's to get the job done. I would not want any longer rod or stroke on a 5.4, b/c of piston speed and more parastetic loss.
Keep the 5.4, and maybe DOHC head swap
The ultimate would be a 6.0 DOHC fully built motor, with a blower or turbo of your choice
If you have an unlimited buget get the SHM block that is Al and you can bore it to 3.7" so you get 6.0L but the block alone is $4500.
5.4's plenty of CI's to get the job done. I would not want any longer rod or stroke on a 5.4, b/c of piston speed and more parastetic loss.
Keep the 5.4, and maybe DOHC head swap
The ultimate would be a 6.0 DOHC fully built motor, with a blower or turbo of your choice
Last edited by TheSeeker; Feb 15, 2004 at 08:28 PM.
Senior Member
Joined: Jan 2003
Posts: 5,097
Likes: 0
From: DETROIT, (formerly Eaton County, Michigan)
Originally posted by TheSeeker
The ultimate would be a 6.0 DOHC fully built motor, with a blower or turbo of your choice
The ultimate would be a 6.0 DOHC fully built motor, with a blower or turbo of your choice
hmm what's the word I'm looking for...
CHA-CHING
Thread Starter
|
Senior Member
Joined: Feb 2004
Posts: 176
Likes: 0
From: Republic of Texas
