I'm a little challenged when it comes to electrical and I'm wondering if someone could help me out.

I would like to install a start button like the ones on the S-2000 and the SRT-10. Is this as simple as getting the start button and wiring it to the start switch? Would the vehicle be able to start with both the switch and/or using the start button?

Thanks in advance.

 

Yup, I have one installed on my L. It can be wired to start when you push the button or with the key. I had it done this way in case the button ever failed.

It is not that hard to install but I didn’t do it. But according to one of my employees at the shop it was easy. But then again they are licensed installers for alarms, starters, stereos etc so I guess they would be able to do a push start in their sleep.

Oh on a side note, as a joke the installer rigged it so it would flash when ever I turned my left turn signal on. I guess that was better then the time they hooked up the horn of a co-workers car to the power seats. Everytime he honked it would move the seat up. Took him 3 weeks to notice it after one time he got mad at a guy who cut him off and layed on the horn for 10 seconds. He was pressed up to the steering wheel. LMAO!!

 

So your button is lit. Where did you purchase it?

Thanks,
Den

 

LOL thats great!!!

 

What all is needed aside from the button? do you need to purchase anything else?....were is your's mounted NTIMD8

 

Yup its lit. Its from a company called ignite. I will take a picture of it to show where it is mounted...

 

Here you go guys. Oh its the red thing in case you didnt figure it out

 

 

I need parts and there numbers...that is badazz...i'm am super interested..How much did you parts cost NT?

 

We sell them at my shop, but we are in Canada We do sell a lot to the states so if you guys are interested then send me an email and we can talk. I am always happy to help anyone out.

 

So let me get this right-- you still have to put in the key so the pats and wheel lock will be disabled , turn it to ACC and then press the button?

How does the rx8 work?

 

I probably can guess the answer.... but do you have to hold the button down till it starts or do you click it once?

 

Yup you put the key in turn it to Acc then push and hold the button till it starts. The Honda S2000, RX8 work just the same. If you didnt need a key they anyone could start your car/truck

 

SICKBOY, I tried replying to your email but it keeps bouncing back

 

whats your e-mail addy