I want to do a built block probably by the end of this year. I dont want to get all crazy with the mods. Im thinking of geting a JLP built shortblock, built tranny, stock heads and cams, stock Eaton and the rest of the mods that I have. I want to add a shot of juice either 125 or 150. Im looking for mid to low 11s, will this get me there?

 

I would port your stock blower as well. I think the built motor, with a ported apten blower, and the 125shot plus what you have should get you there maybe even pass it.


Josh

 

A 4 or 6 pound pulley, good tune and a 75 shot will net you 11.8 on a stock motor! So if oyu do what you say you want to do then mid 11's will be easy. Ask Rob.. But dont stroke his ego.. Its already big enough LOL J/K

Seriosuly though ask him about his set up and see for yourself.

 

I dunno,All you really have besides a N2O is a chip/pully.Those other things are not going to help you much.

 

Well think of it this way. I run 12.6@107mph with Chip, pulley and filter. You better believe a 125 shot with the added benefit of cooling the very hot intake charge is gonna net you a mid 11
The built block will just allow his rod to not go flying through the block.

 

I already did some porting on the Eaton myself, but ill probably send it to Apten they know how to do it the right way. My respect gos to Rob hes got the nuts to do that with his L.

 

*Diablo by JLP *SFPH 4lb Lower *SFPH 2lb Upper *JLP Cool Air Ind. *Accu-Fab T/B *Plasma Booster *Zex 75HP Wet Nitrous *Denso IT-22's *PSP Truck Trak Bars *PSP Drive Shaft Loop *28" Hoosier's *16"AR Black Rims *2" DJM Shackles = *11.81 @ 113.98

Same as above ran w/only 4lbs of pulley + 65 n2o HP = (2) 12.0's

New Mods Added after the 11.81 (for the Upcoming Season)
*Factory Tech V/B
*JDM 58" Bars
*H+W Ported Eaton (THATS OUR PAL WES)

 

S.Cal.. click on Rob's link (sig) and watch that video. That about sums it up...