have an 02 can I run a 2# pulley without a chip?
I didn't want to mess with anything other than that
along with an airfilter, With no problems?
Just to get a little more out of her

mosty so I can change the belts!

Thanks

 

You can safely run a 2# pulley w/o a chip. Many people (including myself) run a 4# without a chip.

Good luck!

 

ive ran 2lb lower with no chip for a year now no problems

 

Yep, a 2lb with no chip is ok. Your a/f will still be plenty safe.

 

I ran a 4# for 6,000 miles w/no chip. No problems and the plugs showed an ever so slightly lean condition. Probably would have been cured with 1 range colder plug.

I gotta tell you though. A 4#, chip & filter will make you do this...



Rich

 

thanks everyone for letting me know it is ok to do that.
the ablity to change the belts alone is worth the change plus a little more power wont hurt

thanks again

 

Does anyone still sell the 3#? Or does anyone have a used 2# or 3#?

 

If you want to change the belt, get a 4#'r and a chip or Predator. You don't need to change the belt with a 2#. I even know one guy that's using his stock belt with a 4# lower. I wouldn't reccomend the 4# with no chip, and most of the tuners would say the same thing.