Low octane , Steele ? your missing 9 inches!
Thread Starter
|
Senior Member
Joined: Feb 2001
Posts: 1,394
Likes: 0
From: San Antonio
Low octane , Steele ? your missing 9 inches!
So when are we going to do this to your truck...? How about next Saturday
need breathers about 9 inches off the cam covers.
need breathers about 9 inches off the cam covers.
Last edited by RED 92; Jan 23, 2004 at 09:46 AM.
Thread Starter
|
Senior Member
Joined: Feb 2001
Posts: 1,394
Likes: 0
From: San Antonio
ya it works good now It took a month to get it back ............hey, is Steele doing some work to your truck?
If he is, you might want to wait until next weekend so I can help and make sure he dosnt bone it up
If he is, you might want to wait until next weekend so I can help and make sure he dosnt bone it up
Senior Member
Joined: Sep 1999
Posts: 1,462
Likes: 0
From: San Antonio, Texas
Breather = Bad. I've got one you can have for free. Dyno tested to loose 3hp, even with the A/F corrected on that bank.
also, I understand you dont have traction bars yet clay. Hmm, I just happen to have a set of metcos sitting in my garage
We definately need a mod party, I've got brakes to do on the white r***r.
also, I understand you dont have traction bars yet clay. Hmm, I just happen to have a set of metcos sitting in my garage
We definately need a mod party, I've got brakes to do on the white r***r.
Senior Member
Joined: Jan 2001
Posts: 647
Likes: 0
From: San Antonio, TX, USA
Originally posted by RED 92
ya it works good now It took a month to get it back ............hey, is Steele doing some work to your truck?
If he is, you might want to wait until next weekend so I can help and make sure he dosnt bone it up
ya it works good now It took a month to get it back ............hey, is Steele doing some work to your truck?
If he is, you might want to wait until next weekend so I can help and make sure he dosnt bone it up
In summary, the links above don't work and you're gay!
--Steele
Senior Member
Joined: Feb 2003
Posts: 408
Likes: 0
From: Sugar Land, Texas
Naw im going to hold off on getting the work done, and just get it all done at the same time when i get the LT's installed in houston and can get it on a dyno. I was just wondering if you had any time this weekend if we could hook that thing up to my truck and flash it for a 2# upper that is on there right now, but it doesnt sound like you are free this weekend.
Senior Member
Joined: Feb 2003
Posts: 408
Likes: 0
From: Sugar Land, Texas
Trending Topics
Thread Starter
|
Senior Member
Joined: Feb 2001
Posts: 1,394
Likes: 0
From: San Antonio
Originally posted by Nathan
Breather = Bad. I've got one you can have for free. Dyno tested to loose 3hp, even with the A/F corrected on that bank.
Breather = Bad. I've got one you can have for free. Dyno tested to loose 3hp, even with the A/F corrected on that bank.
thats true if you only used "one" and still had the intake boot open to the cam cover.....did you add a breather and leave the line to the intake boot on the drivers side connected......you would have to disable the complete PCV system.
Nathan, do you still have your truck. ?....and I'll take that "free" breather . I'll sell it to Steele ..hes not the sharpest tool in the shed
, ...but still a tool Steele I'm going to call Mike and try to get a dyno in to see my breather gains
Last edited by RED 92; Jan 23, 2004 at 10:11 AM.
Thread Starter
|
Senior Member
Joined: Feb 2001
Posts: 1,394
Likes: 0
From: San Antonio
I just got back from Mike Murillo Motorsports and a dyno pull. I pulled 400.3/493 with af ratio 11.2..........sorry I didnt hang around Steele, .....I told Mike you were coming to take the whole shop out to lunch
Mike gave a big thumbs up to my dual breather set up and recommended a third one the oil cap.
Mike gave a big thumbs up to my dual breather set up and recommended a third one the oil cap.
