Hey Guys & Girls,
I am finally making headway on getting my zex up and running. It took me nearly a month to make the switch panel.



Here is the bottle


Now under the hood. Have the stainless purge lines run and only have to finish the hook up tommorrow.



Alvin

 

Nice setup. Is that all fiberglass on the dash or did you just sand down the plastic and paint?

 

i love custom stuff..

 

Awesome Set Up,
Nice install, I see you have all the extra's too
Heater, Electric Bottle Opener, Purge,
SMOOOOOOOOOOOOKING

I did mine like everyting I do,
Cheap, and in a hurry, HEHEHEHEHEHE
Oh ya, and in the Winter (snow and all)
Ask V about my Purge setup
I purge it a few blocks before I get to the track,
THE OLD FASION WAY,
I STOMP IT, hehehehehehe


Switches are up high, left of steering wheel (sitting in seat)


Bottle's only in for special Days, other wise the wires
and hose hides behind the side mat to the left in that pic,
and the bottle and Brackets and heater come out in one piece,
This way I have the full 4x8 use of my truck back,
(lots of HD runs, dam house....)

I have new brackets now, made by the world famous Gator (Thanks Pal) They're polished Stainless and have a diff angle.
THEY ALSO LOOK MUCH BETTER, I need to get some shots


Under the Hood, I did a little better job with



I think I'll go for the Bed Rug and a cleaner look someday in the Back, you just inspired me.
Gee thanks, more money I aint got

 

Speaking of Nitrous, I just re-installed my zex kit today. Its jetted for a 125 shot. I dyno'd stock with intake/exhast at 363/443. Im going to go back to the same dyno and dyno with the nitrous, no chip, no pulleys, and see what kinda of gains I get!

-Mike

 

http://www.svtownersassociation.com/...=&postid=47066

Found this over at the SVTOA site if anyone else is looking for switch ideas.

Later...
Bruce

 

Dogleg, do you have any more pic's of your interior? It looks awesome!

 

SWEET!!

 

The dash parts are not even sanded smooth, I like the ruff look.
Here is the address to more picture of the truck.

https://www.f150online.com/galleries...y.cfm?gnum=355

thanks for the kind words Guys, that yellow on red is a little too much for most people.

 

125HP
GO GET UM MIKE
Dam I may have to step mine up a notch now

 

Where is that purge exiting? I always figured having it purge infront of the HE would be beneficial and cool

 

i have mine in the exact same spot..... i love that "usless" pocket in the early Ls

 

dogleg,

A little off topic but what kind of paint did you use to paint your blower and intake?