JLP customer runs 11.14@122.8
Thread Starter
|
Senior Member
Joined: Dec 2000
Posts: 2,365
Likes: 0
From: Elkton, MD
JLP customer runs 11.14@122.8
A 2002 Lightning that JLP recently built pulled an 11.14@122.8 with 16" rims, 18psi of boost and only 3/4 throttle the whole way down the track. It was being tested tonight.
The truck has a JLP block, heads, cams, and a KB blower. Very nice setup!
The truck has a JLP block, heads, cams, and a KB blower. Very nice setup!
Senior Member
Joined: Sep 2001
Posts: 4,342
Likes: 0
From: Motor City
Originally posted by blowntruck
Niiiiice
But why only run at 3/4 throttle?
Niiiiice
But why only run at 3/4 throttle?
Was he Autotapping and made sure the TPS was only 75%............
Sweet run regardless.....
--Joe
Last edited by soap; Oct 22, 2003 at 09:50 PM.
Trending Topics
Senior Member
Joined: Feb 2000
Posts: 2,141
Likes: 0
From: lancaster,pa. usa
We were trying out a new *Setup*tonight.. We did have it wide open all of 2nd gear and cut back to 3/4 throttle in 3rd. we launched it very easy with a 1.6 60 ft!. the customer was there to watch the run so i didn't want to push it too hard on that pass. the truck was at Full weight and is his *work* truck.. we will be having him @ SSOTN(along with some others
) to make a full wide open pass. I'm sure this thing will go 10's easy.....his mph was a 123.8 too.....
JL
Senior Member
Joined: Dec 2001
Posts: 4,081
Likes: 0
From: Dyer, IN
Originally posted by JohnnyLightning
We were trying out a new *Setup*tonight.. We did have it wide open all of 2nd gear and cut back to 3/4 throttle in 3rd. we launched it very easy with a 1.6 60 ft!. the customer was there to watch the run so i didn't want to push it too hard on that pass. the truck was at Full weight and is his *work* truck.. we will be having him @ SSOTN(along with some others) to make a full wide open pass. I'm sure this thing will go 10's easy.....his mph was a 123.8 too.....JL
We were trying out a new *Setup*tonight.. We did have it wide open all of 2nd gear and cut back to 3/4 throttle in 3rd. we launched it very easy with a 1.6 60 ft!. the customer was there to watch the run so i didn't want to push it too hard on that pass. the truck was at Full weight and is his *work* truck.. we will be having him @ SSOTN(along with some others) to make a full wide open pass. I'm sure this thing will go 10's easy.....his mph was a 123.8 too.....JL
Nice job guys!!!!!!!!!
