Level 10 Tranny pulls Boat
Thread Starter
|
Senior Member
Joined: Mar 2000
Posts: 6,798
Likes: 0
From: TEXAS
Level 10 did a rebuild on my tranny about a 18 months ago and it is holding up well. BUT I am only making 500 ft lbs - But it is a daily driver... AND I tow a 5000 lb boat ...
So far so good. They really seemed like they knewtheir stuff - I watched them do the rebuild and was impressed.
Sounds like they have upgraded their process some.
Some Pics here of Level 10 and my rebuild to give you guys an idea who they are and what they do ...
http://www.svtlightnings.com/svt/how...10/level10.htm
Pat doesnt return my phone calls or emails BUT I wont hold that against them...
Doug
Here are my 3rd gear clutches - The tranny was still shifting fine when I had the rebuild done
Heres the new stuff they used on mine
No idea if they still use the raybestos blues....
Doug
So far so good. They really seemed like they knewtheir stuff - I watched them do the rebuild and was impressed.
Sounds like they have upgraded their process some.
Some Pics here of Level 10 and my rebuild to give you guys an idea who they are and what they do ...
http://www.svtlightnings.com/svt/how...10/level10.htm
Pat doesnt return my phone calls or emails BUT I wont hold that against them...
Doug
Here are my 3rd gear clutches - The tranny was still shifting fine when I had the rebuild done
Heres the new stuff they used on mine
No idea if they still use the raybestos blues....
Doug
Last edited by Silver_2000; Oct 3, 2003 at 09:52 AM.
Senior Member
Joined: Oct 2001
Posts: 1,205
Likes: 0
From: Warner Robins, GA
Nice boat Doug! I pull my 3000# boat with a 4# pulley and no chip with no problems whatsoever! What kind of power package does your boat have? I have a Mercruiser 4.3L.
Trending Topics
Senior Member
Joined: Mar 2002
Posts: 3,472
Likes: 0
From: Shelton, Connecticut
Did the snapple bottle end up in your tranny>??? I love putting suprises in customers transmissions. I put a couple goldfish in one guys. Not so sure how the tranny is holding up with the fishtank gravel in there though. 
-Mat-
J/K by the way.
-Mat-J/K by the way.
Last edited by Silver_2000; Oct 3, 2003 at 03:36 PM.
Thread Starter
|
Senior Member
Joined: Mar 2000
Posts: 6,798
Likes: 0
From: TEXAS
Originally posted by 01Lightning
Nice boat Doug! I pull my 3000# boat with a 4# pulley and no chip with no problems whatsoever! What kind of power package does your boat have? I have a Mercruiser 4.3L.
Nice boat Doug! I pull my 3000# boat with a 4# pulley and no chip with no problems whatsoever! What kind of power package does your boat have? I have a Mercruiser 4.3L.
Should have gone for the 5.7... He he ...
Doug
Senior Member
Joined: Jul 2002
Posts: 512
Likes: 0
From: Rahway, NJ
Yeah man, that boat was the chit.....Had to sell it though because it only did 65 mph.....I'll be looking for another one next spring....
I'll be looking into 34 foot or better with twin 502's aboard....
I'll be looking into 34 foot or better with twin 502's aboard....
Thread Starter
|
Senior Member
Joined: Mar 2000
Posts: 6,798
Likes: 0
From: TEXAS
FYI - This thread was split off the JL level 10 thread ... TO keep it on topic
That Baja is only about 7mph faster than my Regal. Need to run the tank down to 1/4 and pull all the crap out and trim it up to see what the real top speed is....
I really dont need more Top Speed - I would like more hole shot though....
Doug
That Baja is only about 7mph faster than my Regal. Need to run the tank down to 1/4 and pull all the crap out and trim it up to see what the real top speed is....
I really dont need more Top Speed - I would like more hole shot though....
Doug
Senior Member
Joined: Oct 2001
Posts: 1,205
Likes: 0
From: Warner Robins, GA
Originally posted by Silver_2000_
!
I really dont need more Top Speed - I would like more hole shot though....
! I really dont need more Top Speed - I would like more hole shot though....
