San Antonio Dyno
Member
Joined: Mar 2001
Posts: 77
Likes: 0
From: San Antonio, TX
It was good to see some of the area L guys. DynoTex Racing has a very nice and clean shop.
Even with the 6# pulley, my a/f is still safe. Using a tail-pipe sniffer my a/f ratio stayed below 11.5 to 1 from 4000 rpms to 5300 rpms and dropped as low as 11.0 to 1 at 4400 rpms.
My numbers ended up at:
383.0 hp
476.7 tq
When the weather cools off, we need to hit the tracks.
Greg
Even with the 6# pulley, my a/f is still safe. Using a tail-pipe sniffer my a/f ratio stayed below 11.5 to 1 from 4000 rpms to 5300 rpms and dropped as low as 11.0 to 1 at 4400 rpms.
My numbers ended up at:
383.0 hp
476.7 tq
When the weather cools off, we need to hit the tracks.
Greg
Member
Joined: Sep 2003
Posts: 11
Likes: 0
Hey guys... wish I would have seen this in time. I live in S.A. and have a 2003 L (white, lowered with Roush kit). I have a Bassani catback, JDM Engineering cold air kit and just put in a JDM superchip. Very curious to see what it dyno's at.
The chip has me a little worried though... the shift points are WAY over redline now... close to 5600 rpm. They guys at JDM say no worries, it can handle that just fine... still makes my butt pucker when I hear it wind up to that pitch.
When do you guys plan to get together again, I'd love to join in!
Tim
The chip has me a little worried though... the shift points are WAY over redline now... close to 5600 rpm. They guys at JDM say no worries, it can handle that just fine... still makes my butt pucker when I hear it wind up to that pitch.
When do you guys plan to get together again, I'd love to join in!
Tim
Senior Member
Joined: Oct 2003
Posts: 419
Likes: 0
From: Southeast of Disorder
D'oh!!!
man! How did i miss this post??!! Dangint, i want to hang out with some L owners in SA. Dang dang dang dang dang dang dang dang dang! Ok, next time you guys get together drop me an email so i can meet up!
Thread Starter
|
Senior Member
Joined: Jan 2001
Posts: 647
Likes: 0
From: San Antonio, TX, USA
Let's all get together at my house next weekend and have a mod day. If anyone needs to hit the dyno I can arrange that as well.
Who's in? Todd!?! You know you need a pulley now bro.
So what do you guys say? Mods, dyno time, and some beers?
BTW: My Lightning brothers need to start coming to my parties. Here is what happened last weekend: Party at The Man House video (~22MB)
--Steele
Who's in? Todd!?! You know you need a pulley now bro.
So what do you guys say? Mods, dyno time, and some beers?
BTW: My Lightning brothers need to start coming to my parties. Here is what happened last weekend: Party at The Man House video (~22MB)
--Steele
Last edited by skennett; Nov 2, 2003 at 05:48 PM.
Senior Member
Joined: Oct 2003
Posts: 419
Likes: 0
From: Southeast of Disorder
YES!!!
saweet. i caught it before it happened. for sure, 100% count me in. drop me an email (link at bottom of post) and let me know when where, etc. i have some mods on the way, will be here, wed. or thur. so i could for sure use the help. i cant wait!!
alanfrederick@mac.com
alanfrederick@mac.com
Technical Article Contributor
Joined: May 2003
Posts: 598
Likes: 0
From: Corpus Christi, TX
Damn Steele can't make it! Working the turnaround right now. We should be through in a couple more weeks. I definitely want to make one of those parties 
. Your right it's time for a pulley and a chip but I'm gonna need some help. You up for that Bro? I'll give ya a shout when we get through with this freaking turnaround. Later Bro!Todd
Senior Member
Joined: May 2001
Posts: 527
Likes: 0
From: Austin, TX
Originally posted by Txoutlaw
Damn Steele can't make it! Working the turnaround right now. We should be through in a couple more weeks. I definitely want to make one of those parties . Your right it's time for a pulley and a chip but I'm gonna need some help. You up for that Bro? I'll give ya a shout when we get through with this freaking turnaround. Later Bro!
Todd
Damn Steele can't make it! Working the turnaround right now. We should be through in a couple more weeks. I definitely want to make one of those parties . Your right it's time for a pulley and a chip but I'm gonna need some help. You up for that Bro? I'll give ya a shout when we get through with this freaking turnaround. Later Bro!Todd
If you ever need some help, PM me. I go down to Corpus quite often; and I've helped some of my less mechanically inclined friends with their mods. I just installed a couple of pulleys on a couple of friends' trucks two weeks ago. Having never done this before, I can certainly attest to how hard it is to loosen that crank bolt.
-Edward
Thread Starter
|
Senior Member
Joined: Jan 2001
Posts: 647
Likes: 0
From: San Antonio, TX, USA
Originally posted by Txoutlaw
Damn Steele can't make it! Working the turnaround right now. We should be through in a couple more weeks. I definitely want to make one of those parties . Your right it's time for a pulley and a chip but I'm gonna need some help. You up for that Bro? I'll give ya a shout when we get through with this freaking turnaround. Later Bro!
Todd
Damn Steele can't make it! Working the turnaround right now. We should be through in a couple more weeks. I definitely want to make one of those parties . Your right it's time for a pulley and a chip but I'm gonna need some help. You up for that Bro? I'll give ya a shout when we get through with this freaking turnaround. Later Bro!Todd
--Steele
Thread Starter
|
Senior Member
Joined: Jan 2001
Posts: 647
Likes: 0
From: San Antonio, TX, USA
I'm going to start another thread for the mod party this weekend... https://www.f150online.com/forums/sh...hreadid=134682
--Steele
--Steele
Last edited by skennett; Nov 3, 2003 at 12:01 PM.
Technical Article Contributor
Joined: May 2003
Posts: 598
Likes: 0
From: Corpus Christi, TX
Originally posted by Edward
Todd,
If you ever need some help, PM me. I go down to Corpus quite often; and I've helped some of my less mechanically inclined friends with their mods. I just installed a couple of pulleys on a couple of friends' trucks two weeks ago. Having never done this before, I can certainly attest to how hard it is to loosen that crank bolt.
-Edward
Todd,
If you ever need some help, PM me. I go down to Corpus quite often; and I've helped some of my less mechanically inclined friends with their mods. I just installed a couple of pulleys on a couple of friends' trucks two weeks ago. Having never done this before, I can certainly attest to how hard it is to loosen that crank bolt.
-Edward
Originally posted by skennett
Yeah, just let me know when you want to work on it. We can throw another mod party at the house just for you man!
--Steele
Yeah, just let me know when you want to work on it. We can throw another mod party at the house just for you man!
--Steele
Thread Starter
|
Senior Member
Joined: Jan 2001
Posts: 647
Likes: 0
From: San Antonio, TX, USA
Originally posted by Txoutlaw
That's what I'm talkin about! You just can't beat the brotherhood of L owners! Thanks fellas!
That's what I'm talkin about! You just can't beat the brotherhood of L owners! Thanks fellas!
Don't forget to sign up for the San Antonio Lightning Event mailing list!
--Steele