Build # billet frame
Thread Starter
|
Senior Member
Joined: May 2003
Posts: 749
Likes: 0
From: Upstate NY
Build # billet frame
Originally posted by BillArf
For those interested in a billet frame like Flying **** showed in pic below shoot me an email. IF there is enogh interest I have a small business owner (Great owner) that would probably do the billet frame at a decent price. His work is terrific. I am awaiting a call from him now. BY THE WAY, I took my stock airbox and applied heat with a heat gun (could have used a hair dryer) and that red label as shown in Flying ****'s pic below lifts right off without damage to it or airbox. Use a little heat on the underside of the airbox lid NOT on the label itself. I slipped a single edge razor blade under it and it came right off. real nice emblem..... never even thought of pulling it off... THANKS, Flying **** for you post in regard to the emblem.
For those interested in a billet frame like Flying **** showed in pic below shoot me an email. IF there is enogh interest I have a small business owner (Great owner) that would probably do the billet frame at a decent price. His work is terrific. I am awaiting a call from him now. BY THE WAY, I took my stock airbox and applied heat with a heat gun (could have used a hair dryer) and that red label as shown in Flying ****'s pic below lifts right off without damage to it or airbox. Use a little heat on the underside of the airbox lid NOT on the label itself. I slipped a single edge razor blade under it and it came right off. real nice emblem..... never even thought of pulling it off... THANKS, Flying **** for you post in regard to the emblem.
ALRIGHT.......... I heard back from the fellow with the CNC machine and he is interested and will do. I need to start hearing from those that are serious so I can estimate about how many of these will be ordered initially. You will be able to call and order the frame direct from the small company that will do them. Cost will be LESS then last year (they were $50 plus shipping last year). I will ask the fellow company to offer both unpolished and polished priced accordingly. IF you are dead serious and will be ordering please shoot an email to me ASAP
bill@auffarth.com
Last edited by billarf; Aug 25, 2003 at 07:52 PM.
