Thanks as usual for everyone's advice through this mishap. And a big thanks to REM for taking care of me.

The second KB is pumping out 15lbs of boost we have a custom tune, very smooth power curve and the results are:

411 hp at the rear

507 lbs of torque at the rear

Remember this is a Mustang Dyno, add aprox 16% and you are in the dyno jet range for calculations.

For those of you who have been following the KB saga, it turns out yours truely had a little difficulty with the reinstall and I spilt some anti freeze in the last place I should have, down the plug ports. When the new denso's were installed, you know where all that fluid went. Yah, o.k. I'm human. Lost the denso's, took out one coil, but what the hell I am picking up my L tomorrow and life is good!!!

Have an awesome weekend, it's time I added a few miles to my 1100 mile '03 L !

I think I am all modded out for a while, here's how I got there:

KB
6lb lower
2lb upper
Diablo flip
JLP Ram air
Accufab single blade
Ported and Polished Plenum
Autolite AR 93's
Cobra 55lb dual fuel pumps
Dynatech long tubes high flow cats
Magnaflow cat back
oil separator
Greg Evans valve body
Ford 4x4 deep tran pan
Fluidyne heat exchanger
Lunar gauges, boost and fuel
Dual pillar pod, painted
trak truck traction bars
3" rear lowering shackles
Nitto 555R's
PSP safety loop
blah blah blah

 

Awesome. Glad you found the problem. Now go out and beat up on some of that local rice!

 

Glad your up and running again.
Get out and put some miles on that Beast and enjoy!

 

Dan YOU KILL ME

Glad you got it figured out Bro

NOW
It's time to stop Modding
and time to start Riding

I know you enjoy modding it, but fear not my Friend,
before you know it, you'll be putting a Built Motor in it

 

****, Six Spd and Rob.......

Tim (REM) told me to take it easy on the way home. Maybe he has some pull with the big guy upstairs, way upstairs - the typical summer rain storm in Florida followed me all the way, didn't pass 60 mph.

Ya gotta laugh, hey can't wait til tomorrow!!

Thanks again!

Dan

 

Go Dan.....did you put injectors in....

 

Dan, I having an inlet , upper plenum, fabricated for the KB....this is going to be a serious piece...will let you know when its done next week.....

 

according to that formula your running about 480 HP to the rear wheels. VERY IMPRESSIVE

 

Gentlemen,

My L is now considered a BEAST as Rob would put it.

Pete, I didn't put the injectors in and I am very curious about this "serious addition" of yours!

Not only does she have the bark, long tubs, high flow cats and magnaflow cat back - but she just rips - took her out an hour ago, finally dried up here and I gotta say - scared the ***t out of me. My heart was pumping so hard I couldn't hear the kB wine.

Yeah Baby, I'm back - looking for targets...............

Have an awesome weekend all!

DLM

 

 

Welcome back..........

PEacE................
Jim