Ok, we are trying to get my buddy's MAC pan off and it seems to be fused to the transmission. All of the fluid has been drained and all of the bolts have been removed, and my huge *** can't budge the damn thing.

ANY IDEAS???


-Kimball

 

Rule #1: If all else fails, get a bigger hammer.

 

Ford wench....8 lb. sledge! Just kidding.

Be carefull and use a screwdriver to pry it off. Tap it in at a few places around the pan.....just don't damage the trans.

Jerry

 

alot of times the gaskets can turn into superglue.
i would get a knife and pry it

 

Rubber hammer, and tap/hit on the sides of it. You never want to use anything to "pry" on the gasket surface. You can and will damage the gasket surface, and cause yourself a leak.

 

well, we went back out and it popped back of without doing anything

Thanks anyways guys!!!

-Kimball

 

 

are you sure cyntaxx didn't crawl up the drain plug & hold onto the pan while you were pulling on it? LOL