1/4 times sound low?????
Thread Starter
|
Senior Member
Joined: Jun 2002
Posts: 284
Likes: 0
From: Liberty Twp, OH
1/4 times sound low?????
Just got back from the track. The best time I could pull was a 13.018 @ 105 with a 60 ft of 1.936.
My mods are a 6 # pulley, chip & fast air kit.
I was hoping for some 12.8 or 12.9's. Whats your opinion.
My mods are a 6 # pulley, chip & fast air kit.
I was hoping for some 12.8 or 12.9's. Whats your opinion.
Last edited by SvtLightning02; Jul 25, 2003 at 01:20 PM.
Senior Member
Joined: Nov 2001
Posts: 1,037
Likes: 0
From: Orlando, FL
Was it REALLY hot................humid?? That'll do it to ya.............all summer long. Your 12.9 MIGHT be attainable in the heat if your 60' was in the 1.8 range..................Don't be concerned about the times too much................these trucks HATE heat
JC
JC
Senior Member
Joined: Jan 2001
Posts: 647
Likes: 0
From: San Antonio, TX, USA
Referencing this thread: Is the heat that BAD on these trucks?
--Steele
Forced induction motors lose about 2% of their power for every 10-degree increase in ambient temperature. Normally aspirated motors only lose about 1%.
The best race weather for our trucks is:
50 - 60 degrees ambient temperature
Barometric Pressure over 30 in.
Humidity below 75%
Ambient temperature and power are indirectly proportional. Ambient temperature and traction are directly proportional.
The best race weather for our trucks is:
50 - 60 degrees ambient temperature
Barometric Pressure over 30 in.
Humidity below 75%
Ambient temperature and power are indirectly proportional. Ambient temperature and traction are directly proportional.