Lightning

installed new c&l 95 mass air

Thread Tools
 
Search this Thread
 
Old Jul 5, 2003 | 06:33 PM
  #1  
WhtSvt's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2001
Posts: 235
Likes: 0
From: Dearborn hts MI USA
Unhappy installed new c&l 95 mass air

what did i do wrong the truck is shaking a little and its hard to take off i checked all the connections and the are fine i have a 99L.its seems like its not getting any gas or too much?
 
Reply
Old Jul 5, 2003 | 06:37 PM
  #2  
Justin@JDM's Avatar
Banned
Joined: Dec 2002
Posts: 655
Likes: 0
Do you have a chip calibrated for the new mass air?
 
Reply
Old Jul 5, 2003 | 06:39 PM
  #3  
WhtSvt's Avatar
Thread Starter
|
Senior Member
Joined: Apr 2001
Posts: 235
Likes: 0
From: Dearborn hts MI USA
says i dont need a chip. says its for a stock truck
 
Reply
Old Jul 5, 2003 | 06:49 PM
  #4  
Justin@JDM's Avatar
Banned
Joined: Dec 2002
Posts: 655
Likes: 0
whtsvt,

C&L sells the 95 MM kit for the 01's and up. For the 99-00 Lightning's they sell the 85 MM kit. I just don't see how you can go from an 80 to a 95 without a different tune. I am not to familiar with C&L's setup but don't they give you a chip with their kit? I think you were supposed to get the 85 MM Maf. It basically souns like your running too lean. Which I could see that happening when going from an 80 to a 95 on the stock program.
 

Last edited by Justin@JDM; Jul 5, 2003 at 06:57 PM.
Reply




All times are GMT -4. The time now is 07:32 PM.