Engine Up Date!!!!!
Re: Engine Up Dtae!!!!!
Originally posted by Suavy
Great job Charles Warner!
Great Job Johnny & Sue!
Gregg Evans I don't know where to begin!
JDM, great job on the tune!
Razors Edge, Tim, thanks for the valves
PSP, Sal, thanks for all your info and guidance.
Peace Suavy
Great job Charles Warner!
Great Job Johnny & Sue!
Gregg Evans I don't know where to begin!
JDM, great job on the tune!
Razors Edge, Tim, thanks for the valves
PSP, Sal, thanks for all your info and guidance.
Peace Suavy
J/K
man this sounds really good Suavy,
I am sooooooo happy for you and it sounds
like you got a true Beast and it's great to see all
the supporting Vendors involved
Silver bolt, no air flow checks yet. I am just happy driving it. I have to send the chip back for a little tweek first. I'm going to change over to the 11.5 pulley tomorrow to try it out before I send the chip back.
It sounds and feels real stong even with F-1's on I have bolted my ET streets on yet. I want to see how they act with my JLP lift bars.
Suavy.
It sounds and feels real stong even with F-1's on I have bolted my ET streets on yet. I want to see how they act with my JLP lift bars.
Suavy.
All I have is a VHS style cam corder. Is it possable to host it? I am going to film my runs this weekend.
Cepeapea, at idle you can hear it rumble a little but give it a goose and everyone looks around took off at a rool and hit it about 25 mph and melted the tires with a third gear chirp.
Cepeapea, at idle you can hear it rumble a little but give it a goose and everyone looks around took off at a rool and hit it about 25 mph and melted the tires with a third gear chirp.
I was it was to be tuned through a Company called Apten from St louis. However, Jerry the tuner could not reach an agreement with Dave. So after a while I started to look else where. I hear Jerry is one of the best! I would love to have him do it I just need to have him do it at another shop. Besides, I think JDM will take care of me.
Suavy
Suavy
Just wanted to let you all know that I took my chip off to send for an adjustment. The dang thing runs great with out the chip! The torque converter came in great and the monster box is still hitting hard in 3 gears. Further, no detonation the only problem is the torque limmiter & govenor are working again!



Very nice dude ... but pics?