inline transmission filter part number
Thread Starter
|
Senior Member
Joined: Jul 2001
Posts: 5,592
Likes: 0
From: Nashville
Is that for the kit or the filter? The # on the filter housing is the same except for BA at the end instead of the AA...
I cut open my filter and didn't find much. Overall I'm surprised to see the metal on the magnet inside the pan and inside the filter was not much at all. Especially with the treatment this tranny gets.
I cut open my filter and didn't find much. Overall I'm surprised to see the metal on the magnet inside the pan and inside the filter was not much at all. Especially with the treatment this tranny gets.
Last edited by easterisland; Jun 21, 2003 at 12:01 PM.
Senior Member
Joined: Sep 2000
Posts: 1,704
Likes: 0
From: Mpls, MN
I'm sorry
I thought you were looking for the kit. The part number for the replacement filter is: XC3Z-7B155-BA Ford recommends replacing it every 30,000 miles on the 4R100 apparently.
Ford TSB 00-23-10 (PDF Format)
I thought you were looking for the kit. The part number for the replacement filter is: XC3Z-7B155-BA Ford recommends replacing it every 30,000 miles on the 4R100 apparently.Ford TSB 00-23-10 (PDF Format)
Last edited by AjRagno; Jun 21, 2003 at 12:50 PM.