hi guys, yet another question for you,

i was installing my diablo chip last night and when i went to start the truck it wouldn't turn over. this isn't what concerns me though, there was also a buzzing sound coming from around the fuse box, not sure if what that could be. some more knowledgable people than me also have no clue what this could be. i sent the chip back to the vendor and hopefully they can get it to work, but after several searches i have found nothing about that buzzing sound.... any ideas?????

thanks,
dan

 

The buzzing sound is likley a relay in or around the fuse box.

Call the chip vendor. Sound slike it may have "issues"

Doug

 

thanks for the response. i called the vendor and he said he had never heard of anything like this before. what exactly do you mean by "issues". thanks, dan

 

Are all your contact's clean?

Double check.

 

checked and recleaned the contacts last night. same deal. thanks though.

 

the Diabo chip was out of my truck. I gave it to Dan after I got my Superchip burned and installed. My computer code (correct me if I'm wrong dan) is cux2 and dan's in the 99 is cux1. But he never put the chip in the truck, untill after the reburn. He sent the chip into Paul over at Razor's Edge and bought a 6# lower and a valve body, and got a reburn. The parts came back and he installed everything, and the chip. and the truck would turn over but wouldn't start. Also all that buzzing he was saying, I did hear last night coming out of the fuse box area, (when key was in acc or on mode) but I have never heard that b4. So we took the chip out and sent it back to paul over at rem. (truck starts fine without chip) He said he'd be able to take care of it. My question is, with the right program on the chip, the buzzing SHOULD go away? Thanks, Shane

 

dan did you get your chip back? Paul said he reburned it and sent it back to you a few days ago. Let me know when you get it back. I'd like to know how your truck's doing. Thanks, Shane

 

nope... did not get it yet. said it would be here yesterday at the latest. most likely ups's fault.

 

yeah, usually they ship them right out and I get it back in a few days... either way, let me know when ya get it back. we gota get it in there and test out your new mods! thanks, Shane

 

great news. Dan got his chip back today. We sent back the diablo and got a reburn, for our troubples Paul over at Razor's Edge sent Dan back a delta chip. So now dan has a dual program chip! Thanks again paul for your service. also the buzzing has gone away and the truck now starts fine with the program on the chip for the 6#er. Dan let me know when ya wanna hit the track. Next tuesday if its not 100 degrees again... let me know
thanks again, Shane