So I put this big T.B. on andneed to know,,,
At what rpm does your trucks idle at in drive- Im at about 750rpm and seems a little high, but I cant remember what the idle was w/stock t.b.
Also, the gas pedal when engine running has an annoying sticky spot when I crack the throttle
Last, which wires on tps do I probe and whats the magic number to adjust to?
I want to give this (engine jewelery) a fair chance before I get discusted and put the stock one back on

 

I can't find the thread right now but remember Brooks (Clonetek) doing a full write-up with pics on adjusting the TPS. Good luck!

 

here ya go

Thread

 

Thanks B.T.W.,, what does your tach read at idle in gear?

 

I *think* it is around 650-700? It may take a couple of seconds for it to reach normal idling rpms from a cold start...

 

Mine purrs like a kitten at 600-650. (stock TB)

WOT

 

in park, i have mine running at 900 ish RPM's. Any lower and the blower will make a racket.