Autometer pod/ with Ford gauges? HELP
Thread Starter
|
Senior Member
Joined: Oct 2002
Posts: 2,894
Likes: 0
From: Holiday FL
Autometer pod/ with Ford gauges? HELP
Does anyone have the Ford Racing brand gauges installed in an autometer pillar pod? I like the looks of them but dont know if they fit the pod or if they make a Trans Temp and a Boost gauge
Senior Member
Joined: Oct 2001
Posts: 729
Likes: 0
From: S.E. Michigan
Yes, I have that same setup. The don't make a trans temp gauge, but do make a water temp guage. The water temp gauge will work, it just says water temp and not trans temp on the face.
Hope that helps.
Hope that helps.
Senior Member
Joined: Mar 2001
Posts: 749
Likes: 0
From: In the shop cutting something up
I got this one from www.KennyBrown.com here in Indy.
They now have a 2.5(?) for $30.00 in the garage sale part, page 6.
Yes the one I got was made by Autometer.
They now have a 2.5(?) for $30.00 in the garage sale part, page 6.
Yes the one I got was made by Autometer.
Senior Member
Joined: May 2002
Posts: 4,928
Likes: 1
From: The People's Republic of Los Angeles
Originally posted by TZRLightning01
where do you buy these gauges? are they made by Autometer?
where do you buy these gauges? are they made by Autometer?
Senior Member
Joined: Oct 2002
Posts: 910
Likes: 0
From: MA
Trending Topics
Senior Member
Joined: Apr 2000
Posts: 4,402
Likes: 0
From: On the side of the Road attempting to explain 135 miles per hour
Info nugget
Take a blue Sharpie and make an "x" pattern on the end and down the sides of the bulb, they will match the dash lights better.
