Bucket Conversion Help needed
Thread Starter
|
Senior Member
Joined: Jul 2000
Posts: 1,296
Likes: 1
From: Shelbyville. IN
Bucket Conversion Help needed
Two questions after I started installing my cut down seat.
1. I assume I just need a longer bolt on the inside front passenger seat? The stock one will not work.
2. How the he!! do I get the passenger side seatbelt back in????? Do I need a new part? HELP!!
-Kimball
1. I assume I just need a longer bolt on the inside front passenger seat? The stock one will not work.
2. How the he!! do I get the passenger side seatbelt back in????? Do I need a new part? HELP!!
-Kimball
Senior Member
Joined: Nov 2001
Posts: 6,166
Likes: 0
From: Burlington, Ma
Ya I had to get a longer bolt
As for the seat belt, many have modified the stock belt. I went to the Ford dealer and ordered a seat belt from a F150 with stock captain chairs. I had to drill a hole in the inside bracket and the belt fits perfect.
As for the seat belt, many have modified the stock belt. I went to the Ford dealer and ordered a seat belt from a F150 with stock captain chairs. I had to drill a hole in the inside bracket and the belt fits perfect.
Senior Member
Joined: Oct 2001
Posts: 6,353
Likes: 0
From: NEW JERSEY
I just cut out the plastic around the bottom of the seat belt and everything fit fine and you cannot see it. I only had to cut about 2 inches off and it does not affect the belt strength in anyway.
Like Don said, You will need a longer bolt.
Hope this helps.
VINNIE
Like Don said, You will need a longer bolt.
Hope this helps.
VINNIE
