and what is a good estamite for one with a 4lb lower,chip filter tB
and 373 gear swap
btw guesstimate with using 26 10.5 slicks
thanks

 

High 1.7's to low 1.8's.

--Joe

 

which one stock or modified?

 

ST.

I have a 2002 4#pulley and this weekend I had a1.85 60ft
on f1s. Track was good at 10:00Am( Atlanta Dragway). My
1999 L With ET streets never was that good in the 60ft.

JEFF

 

i went to the track today with my friend and he ran his 00 with a four pound lower, single blade TB, chip from JL 373 gear no hitch
tail gate down and only ran a best of 1.903 60 ft with slicks does this sound correct?

 

My 99 best was a 1.89 on et streets,but it never had Bars.
But my 2002 has JLP lift bars. Is 1.90 good maybe for your Track
it is ask other Racers if they get better some were else. A lot
of street cars down a track will bring gravel to the starting
line I've seen it first hand. My friend's IHRA Pro Stock car was testing at Atlanta and by 3hours of street cars racing I was like
WTF is this .Next time you go try to the first cars to run.


JEFF

 

I ran yesterday at Cecil
I have an 02 with 4lb lower, chip, filter, TB, 373
AND 65 HP OF Nitrous
I used Hoosiers 28 x 10 on 16 x 8 AR Rims (first time using)
I did (2) 12.0's with 1.6 60's
and a 12.2 with 1.7 60

I use to get 1.8 or 1.9 on F-1's without juice

 

Well I was able to pull 1.7x 60' with a 4lb lower, chip, and pulley. This was on Nitto DR's so I'd say consistent 1.7's or even 1.6 should be possible.