im installing this and a boost gauge later today
does anybody have any pics of wich wire on the o2 to splice into?
thanks for the help

 

the black one

 

Quick Question:

I'm in the process of ordering a dual gauge pod and gauges are to follow, which combo am I better off with:

a Boost gauge and an Air/Fuel gauge

or

a Boost gauge and a Tach gauge


let me know please?

--Russ

 

The A/F gauge is useless with our stock O2 sensors unless you have a wide-band O2 sensor or if your getting the gadgetseller modified A/F gauge. I guess I would go with the tach.

http://www.gadgetseller.com/

 

Why would you get another tach??

--Joe

 

Its for a Crown Vic bro.

--Russ

 

its really easy... i couldnt find the pic i was looken for, but go down there and you'll see your o2 sensors and you'll see a thin black wire... if you have a krimper i didnt cut mine cause the wire was so short (without unplugging it) i didnt wanna work with out slack, so i got a wire krimp and krimped the 2 wires together and ran my wire up to the cab... real easy install... if i find the pic i'll post it, otherwise hop down there and if ya see the black wire let me know... good luck, Shane

 

That clears that up

--Joe

 

There is an O2 sensor harness thingee for A/F gauges but once again, I cant find the link.

 

ls1speed.com for the A/F harness.

 

Here ya go

 

thanks for the posts
i should get it done tomarow night