Is this a must-have? And if JLP just burned my chip, do I need it? I am currently running a JLP 6# lower, Lightning upper, JLP intake, REM smooth intake tube, single blade throttle body, and Bassani headers w/Magna flow exhaust, ported intake plenum and soon to be 4:10 gears, on a 2002 Harley truck, should this be a "next buy"?? How is installation and will I need a re-burn? Please give feedback!
Jonathan!

 

You should get A Factory Tech valve body, its better than the JLP line valve mod, the Factory Tech valve body is complete recalibrated valve body, with the mods you have, this is a must have if you want your transmission to last, so this should be a next buy.

Larry.

 

Larry,
Will I need JLP to re-burn my chip for this mod? And where do I get the FTVB?

 

no reburn needed, use you played with the line presure

 

As long as you didn`t have the line presure raised you won`t need a reburn. You can get a Factory Tech valve body from PSP or REM, they cost around 225$, but well worth it.

Larry.

 

Is this a mod that an average Joe can install? Or do I have to take it somwhere? And what else is required to do it? Thanks for the help by the way!

 

We now carry complete valvebodies for $ 189.00....JL

 

Johnny,
Do you have any pics, and are they the same as the other kits? I would rather get it from you considering everything I have is from you, by the way did you recieve my e-mails? Jonathan Hirsch

 

we have no pic. yet but its just a valvebody thats been upgraded..trust me it works great!...If i havn't e-mailed you back then i must not be getting them.......JL

 

You can install the valve body yourself, I installed mine in about 40 minutes, Tools, you will need an inch pound torque wrench to do it by instructions, otherwise its an easy job.

Larry.

 

JL,
I gues i had the wrong address, Ijust wanted to touch base with youon the re-burnb you did for me.. What youdid and what you did differently that the previous guy. Do you have the part in stock, if so I will order on Tuesday morning, with a little questions answered!! It is different than your 40 dollar line mod valve right? P.S. The traction bars are working great!