Need HP?
Thread Starter
|
Senior Member
Joined: Mar 2001
Posts: 940
Likes: 0
Need HP?
NA 5.6L 32V 900hp mod motor. Bottom end was originally built for 2000hp 4stage nitrous but the owner changed his mind. Nikasil sleaved o-ringed block. block-creted block to handle the xtra stress
Thanks Cyntaxx for trying to help, but I finally got my gallery to work
I have no idea how to post bigger pics, so if you can't see the pics go to https://www.f150online.com/galleries...w.cfm?num=3648
Last edited by Redneck Ferrari; Mar 4, 2003 at 03:39 PM.
Thread Starter
|
Senior Member
Joined: Mar 2001
Posts: 940
Likes: 0
It belongs to a good friend who build engines. He is building a 32v 5.4 stroker for a tuner here.
His waffleing on selling it. He's got about $22k into it. Had to slove some valve spring problems (no one made them) for the cams he's running. The engine is slightly de-stroked and bored I believe. I'd have to hask him the exact specs he has on the heads, but I think he said the intake flowed 315, and the exhaust flowed 265. I'll check and make sure.
One more
His waffleing on selling it. He's got about $22k into it. Had to slove some valve spring problems (no one made them) for the cams he's running. The engine is slightly de-stroked and bored I believe. I'd have to hask him the exact specs he has on the heads, but I think he said the intake flowed 315, and the exhaust flowed 265. I'll check and make sure.
One more
Last edited by Redneck Ferrari; Mar 4, 2003 at 02:40 PM.
Thread Starter
|
Senior Member
Joined: Mar 2001
Posts: 940
Likes: 0
I'll ask him specifics, but he did strengthen the block to combat the block from flexing under very high loads. Originally he wanted to make the engine more square (bore/stroke), but couldn't do it. I believe it is a 5.8L now. 3.7 bore x 3.165 stroke.
I'll have some pics of the CNC'ed heads soon
I'll have some pics of the CNC'ed heads soon
Last edited by Redneck Ferrari; Mar 8, 2003 at 07:19 PM.
