Heading out to Daytona for bike week Wed night.

I want to drop my truck probably 4/6. I currently have 2" shackles problem is i don't have my stock shackles at the house. My understanding is the 4/6 kit is upper and lower control arms, springs and a flip kit for the rear.

So i can't really do that, so i quess i could do a 3" coil drop(which should really be 2") and a 2"hanger kit to go with my 2" shackle kit. So that scenario should drop it 2/3 overall (L's are 1" lower from the start right?)

I got to next day these from Stylin Concepts and get them on Wed before i leave still just want to make sure i get the right stuff.

Still have to lower my bike to and have a bunch of running around.

Thanks

 

lower control arms, coils for the front

hanger, shackles, 2" drop leafs for the rear

that should look really good. since it will be a true or close 4/6 drop

 

Hmm so springs are 2"s also?

That way might work will have to call tomorrow to check that price.

 

You may have to C-Notch the frame on the rear.

 

I went with the Western Chassis 4/6 kit. It's actually a 3/5 drop
on a lightning. Came with everything and you don't have to
notch the rear. If you do lower it 4/6 you probably would have
to notch it. Thought about bagging it?[IMG][/IMG]

 

Ya talking to the my friend that did jamies truck. He wants to bag the front for now and do shackles and hangers in the back for right now.

Are those bazo b4's in 22's? If so thats what i have with 285/30/22's. Would be the same look. Prob is i have 2 days to get parts here and do it =).

 

B4's with 295/30/22's. Don't think you have time to get the stuff
and do the job in two days. Either way have fun in Daytona.
[IMG][/IMG]

 

Got the go ahead for the front have to decide wether or not to do it. It will be done if i decide yes =).

 

4/6 DJM kit here.

 

Hey man if you do descide to notch I have a brand new set of Western Chassis C-notches that I need to get rid of.