Mods to beat an 03 cobra
Mods to beat an 03 cobra
I have some minor mods flip chip,4lb lower,ported TB,air filter kitand upper link bars.A guy in town is talking smack so i wanted to know where i stand and what i need to buy to make it a closer race.
Trending Topics
Originally posted by Unoid
Sounds like it'll be close. Throw on FT VB and he'll be eating your ***
Sounds like it'll be close. Throw on FT VB and he'll be eating your ***
LatemodelRacer2:
I sure hope your talking about racing him from a dead dig. If you plan on any roll he will take you. A stock 03 can roll with a high 11 low 12 sec L
With slicks and good air you should run 12.6's.
--Joe
Re: Mods to beat an 03 cobra
Originally posted by LatemodelRacer2
I have some minor mods flip chip,4lb lower,ported TB,air filter kitand upper link bars.A guy in town is talking smack so i wanted to know where i stand and what i need to buy to make it a closer race.
I have some minor mods flip chip,4lb lower,ported TB,air filter kitand upper link bars.A guy in town is talking smack so i wanted to know where i stand and what i need to buy to make it a closer race.
Originally posted by LatemodelRacer2
What kind off times should I be running with my current mods?
What kind off times should I be running with my current mods?
What Soap said is correct,if the 03 Cobra is stock and you have the mods you say you do you should win from a dead stop in the 1/4 but from a roll from any speed the stock Cobra will beat you.Do not mess with a heavy modded cobra from a roll it will out right embarrass you he will have 10 lenths on you before you know it,trust me been there done that already!Good luck!


