Herb's washers address...
Thread Starter
|
Senior Member
Joined: May 2001
Posts: 3,300
Likes: 0
From: Richmond, VA, USA
Herb's washers address...
here's the old address I found by searching for Herb's washers for the lower control arm clunk.
I figured some of the new guys could use this info, I'm about to order some myself. I haven't heard a clunk yet, but looking at my lower control arm there is definate movement that will affect proper alignment.
EVERYBODY should have this mod clunk or not, because this movement silent or noisey is affecting your alignment and could be affecting tire wear. or you could weld the washers if you like.
also I wanted to make sure there isn't any other info or method (phone or web) of getting in touch with Herb.
jacksonherb@hotmail.com
later,
chris
I figured some of the new guys could use this info, I'm about to order some myself. I haven't heard a clunk yet, but looking at my lower control arm there is definate movement that will affect proper alignment.
EVERYBODY should have this mod clunk or not, because this movement silent or noisey is affecting your alignment and could be affecting tire wear. or you could weld the washers if you like.
also I wanted to make sure there isn't any other info or method (phone or web) of getting in touch with Herb.
jacksonherb@hotmail.com
later,
chris
