About how many.........
Thread Starter
|
Senior Member
Joined: Sep 2002
Posts: 127
Likes: 0
From: USA
About how many.........
Quarts of tranny fluid will i need to fill my tranny back up. This next week i am going to install my LFP VB and Deep sump pan and i need an idea of about how many quarts of tranny fluid i will need to buy to fill it back up.
Thanx guys
Thanx guys
Senior Member
Joined: Mar 2002
Posts: 11,153
Likes: 0
From: Selden NY
Thread Starter
|
Senior Member
Joined: Sep 2002
Posts: 127
Likes: 0
From: USA
Ok after adding the Deep sump pan my tranny will hold about one extra court of fluid right ? So will i still fill it to the full mark on the dipstick will it all work out to be the same.
Sorry such a dump question but i just want to make sure. As not to OVER FILL or UNDERFILL my tanny
Sorry such a dump question but i just want to make sure. As not to OVER FILL or UNDERFILL my tanny
Senior Member
Joined: May 2001
Posts: 1,327
Likes: 0
From: STL
Trending Topics
Senior Member
Joined: Jun 2001
Posts: 276
Likes: 0
From: Okc,OK,USA
M-7195-T E40D/4R100 Deep sump transmission pan
Cast Aluminum pan with cooling fins and Ford Racing Logo cast in bottom
Pan holds approx. 2 qts more ATF
Includes mounting hardware. Filter and Gasket sold seperately.
MSRP 225.00
LOL I knew picking up the new frrp catalog today was a good idea. I'd check around I'm sure you can find it cheaper but thats what a dealer is gonna charge ya
Cast Aluminum pan with cooling fins and Ford Racing Logo cast in bottom
Pan holds approx. 2 qts more ATF
Includes mounting hardware. Filter and Gasket sold seperately.
MSRP 225.00
LOL I knew picking up the new frrp catalog today was a good idea. I'd check around I'm sure you can find it cheaper but thats what a dealer is gonna charge ya
Senior Member
Joined: Oct 2001
Posts: 6,353
Likes: 0
From: NEW JERSEY
Originally posted by BADBLACK99
M-7195-T E40D/4R100 Deep sump transmission pan
Cast Aluminum pan with cooling fins and Ford Racing Logo cast in bottom
Pan holds approx. 2 qts more ATF
Includes mounting hardware. Filter and Gasket sold seperately.
MSRP 225.00
LOL I knew picking up the new frrp catalog today was a good idea. I'd check around I'm sure you can find it cheaper but thats what a dealer is gonna charge ya
M-7195-T E40D/4R100 Deep sump transmission pan
Cast Aluminum pan with cooling fins and Ford Racing Logo cast in bottom
Pan holds approx. 2 qts more ATF
Includes mounting hardware. Filter and Gasket sold seperately.
MSRP 225.00
LOL I knew picking up the new frrp catalog today was a good idea. I'd check around I'm sure you can find it cheaper but thats what a dealer is gonna charge ya
I think JDM has them cheaper. You would have to call though.
VINNIE
Senior Member
Joined: May 2002
Posts: 202
Likes: 0
From: Cypress, TX
Originally posted by VINNIE 
Vinnie, that pan is an awesome piece. I was all ready to order one until I looked under my truck (an 02 HD-150). It looks like it will hang down well below the frame. My truck is lowered 2/4, so I'm concerned it might hang down too low. You have any pics from the side showing how low it really is?...
Senior Member
Joined: Oct 2001
Posts: 6,353
Likes: 0
From: NEW JERSEY
Originally posted by N2TRUX
Vinnie, that pan is an awesome piece. I was all ready to order one until I looked under my truck (an 02 HD-150). It looks like it will hang down well below the frame. My truck is lowered 2/4, so I'm concerned it might hang down too low. You have any pics from the side showing how low it really is?... [/B]
Vinnie, that pan is an awesome piece. I was all ready to order one until I looked under my truck (an 02 HD-150). It looks like it will hang down well below the frame. My truck is lowered 2/4, so I'm concerned it might hang down too low. You have any pics from the side showing how low it really is?... [/B]
VINNIE