King Ranch

Weather Techs

Thread Tools
 
Search this Thread
 
Old Feb 11, 2019 | 12:12 PM
  #1  
Maxs Donkey's Avatar
Thread Starter
|
Member
Joined: May 2007
Posts: 45
Likes: 0
From: Pittsburgh PA
Weather Techs

Hi all. Just a quick question. I recently got myself a 2015 KR after having a 2005 KR. I recently bought a set of Weathertechs for the 2015. My one "problem" is that they cover up half the door sill plate that has the king ranch logo and words on it. I was wondering if anyone has trimmed theirs to fit so you could see the entire door sill plate? It looks like I should be able to follow the line easily enough and I wouldn't be cutting into the water lip protector edge so i think it might be doable?? Thank you.
 
Reply
Old Feb 17, 2019 | 10:20 AM
  #2  
DANSCREW's Avatar
Senior Member
Joined: Dec 2000
Posts: 175
Likes: 1
From: Staten Island New York
Your better off leaving it they protect the sill plates form getting scratched. IMAO Dan
 
Reply
Old Feb 17, 2019 | 05:43 PM
  #3  
Fifty150's Avatar
Senior Member
Joined: Sep 2007
Posts: 3,688
Likes: 28
From: The Barbary Coast
Sure. Cut it up all that you want. After you cut it, it won't work as designed. But you paid for the truck to have that logo. And if seeing the logo is more important than protecting the carpet; it's your truck. That lip is what keeps water, snow, rain, slush, in the liner, so that you can remove it and dump it. Without the lip, everything would just spill and get trapped under the liner, to contaminate your carpet. What you have in mind is about as effective as having a pot with a hole in the bottom, so that the flames can reach in and warm the food faster.
 
Reply




All times are GMT -4. The time now is 08:23 AM.