First step is to make proper speaker enclosures out of the doors.

Have installed: AVIC-N3 HU with IPOD and rear back up camera.

Will install:

MB Quart 6.5" mid bass in fronts
MB Quart 1" tweets in upper vent panel
IDQ10" subwoofer in supercrewsound enclosure under left rear passenger seat
Macintosh MC420 amp, 50w to each front channel and bridged 100 watts to sub
MB Quart passive thermal stabilized xovers for two front channels

RCA's from HU to Macintosh, 14 gauge spker wire from Amp to front's. OEM rear speakers to be driven off the HU.

RAAMat inner and outer doors along with second layer of Ensolite. RAAMat back wall and Ensolite for second layer.

Mount Macintosh under right side passenger seat in place of jack. Relocate jack to inside the spare tire underneath vehicle.

These are from the inside door RAAMat and Ensolite. Next step is to MDF panel over the large access holes and make an MDF speaker adapter for the 6.5 inch Quarts.

Augs

https://www.f150online.com/galleries....cfm?num=13632