Introduction Forum Introduce yourself to the Community here! If you have a technical question, try posting it in the appropriate forum.

Hello

Thread Tools
 
Search this Thread
 
Old Nov 18, 2018 | 11:51 AM
  #1  
Rob LR_n00b's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2018
Posts: 6
Likes: 0
From: MT
Hello

Hey ya'll, just a quick hey to everyone on here. I've been creeping around here for a while. Finally registered and making my first post. So a little bit about my pickup. It's a 05 Lariat SCrew 4x4. Yesterday I installed a Motofab level kit (3" front, 2" rear) and some 35" x 12.5" Toyo's that were takeoffs on the factory 18's. I wish I would have taken before and after pics. Oh, well...I'm waiting to receive my Havok 20's w/ 35's. I can't wait to get them. So, my shop manager gave me the set of tires to throw on. Currently, I have a Volante CAI installed. The truck came with, what I believe, a crappy Bullydog tuner running a 91 octane performance canned tune. Tossing around getting a better tuner like a CTS2 or maybe a Gryphon with custom tunes. After reading a lot on the forums, it's looking like I might be changing my mind on the CTS2 to a SCT. Let's see, deleted the cats, American thunder muffler. I did have MSD COPs, but had to start replacing COPs when they were getting shot, so going back to factory ones. I do think that the MSDs did make a "seat of the pants" difference. Future plans.... I definitely want to go higher. Looking a a BDS 6" lift. I have a full Skar audio system to I stall... 6.5" components for the front and rear on a 100x4 AB amp and 2 10's in a sealed, underseat enclosure on a 1200x1, and a pioneer deck running everything. So yeah, so much for a quick intro.
 
Reply
Old Nov 18, 2018 | 11:55 AM
  #2  
ManualF150's Avatar
Technical Article Contributor
Joined: Jan 2007
Posts: 10,636
Likes: 264
From: Vernon, NY
Welcome! Got any pictures of your beast?
 
Reply
Old Nov 18, 2018 | 11:58 AM
  #3  
Rob LR_n00b's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2018
Posts: 6
Likes: 0
From: MT
Not yet, I kinda wanted to get it cleaned up. Its really crappy out here right now. She is need of a serious bath
 
Reply
Old Nov 18, 2018 | 11:58 AM
  #4  
Rob LR_n00b's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2018
Posts: 6
Likes: 0
From: MT
I will get something up soon though
 
Reply
Old Nov 18, 2018 | 12:00 PM
  #5  
ManualF150's Avatar
Technical Article Contributor
Joined: Jan 2007
Posts: 10,636
Likes: 264
From: Vernon, NY
Awesome! Can't wait to see it.
 
Reply
Old Nov 18, 2018 | 10:18 PM
  #6  
Rob LR_n00b's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2018
Posts: 6
Likes: 0
From: MT
She still needs a bath, but snapped a quick pic today...
 
Reply
Old Nov 21, 2018 | 06:27 PM
  #7  
Rob LR_n00b's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2018
Posts: 6
Likes: 0
From: MT
Hey ya'll. Just a quick update. Got my my wheels and tires in yesterday. Installation complete today. Gotta wait till the 4th for alignment, but the hell with that. Running them anyway. She still needs a bath, but what do ya'll think?


 
Reply

Trending Topics

Old Dec 6, 2018 | 01:41 AM
  #8  
JamesRoss's Avatar
Junior Member
Joined: Dec 2018
Posts: 8
Likes: 0
Welcome, abroad buddy. Newbie here too.
 
Reply
Old Dec 6, 2018 | 11:43 AM
  #9  
Rob LR_n00b's Avatar
Thread Starter
|
Junior Member
Joined: Nov 2018
Posts: 6
Likes: 0
From: MT
Originally Posted by JamesRoss
Welcome, abroad buddy. Newbie here too.
welcome, glad you could join us. Hope you can find all the help you need here.
 
Reply




All times are GMT -4. The time now is 07:17 AM.