any one install gm full power seats in supercab.I'm going to put 06 denali in my 02 .there is no conpairing confort, tell me about it. Tommy

 

It could be done. But unless you have power seats in there now you will have to run wires and make sure they are properly fused and what not. Which is not a big deal if you know what you are doing, but it is time consuming.

But this is even if they will bolt into place. Im whilling to bet the floor pan of a Denali is stamped alot differently than a 02 F150, there for it would be more trouble than its worth.

why not try and find yourself a good set of used seats from say a Harley, King Ranch, Or Lariat? That would be what I would do

 

If the floor pans don't agree with the brackets on the Denali seats, you could try swapping the brackets from the F150 seats onto the Denali seats. I've seen it done a few times with imports. It may require some fab work, but would be a cool upgrade.

 

I would assume youre going to need some custom seat brackets or like nolongerjeepin said, the f150 brackets will probably work with a little fabrication. It actually shouldnt be too hard and as far as side-to-side it should all fit. Plus like you said, there is no comparison in comfort. GO FOR IT.

 

thanks for youalls coments. I have been bidding on cadollac est. tahoe in my color match ,pewter mint condition.. plus shiping has been selling for $1200 to $1400 .I will go this high in october . They are real hot seller for custom vehicle .A pro advise with there flat surface mount ,very easy to install. I will post before after picture .my truck is 02 LA WEST LAREDO EDITION FX 4 always garraged kept show ready.Will be worth investment to me . Not worth much to sell but I will not sell anyway. Sold my vette convertible . kept my 02 z28 97 f150 work truck. just want a great confordable ride.