Hey all,
I was wondering if anyone out there knows how big of a job it is to get the switches in my door to light up again. of the 7 or so switches on my drivers door (windows, locks, etc) only 1 of them lights up. Any ideas?
Thanks in advance.

 

u should put this in the electrical section, youd get more answers. try searching there first, alot of us have this problem. i have swapped out the factory burnt out LEDs for new ones that will last forever. its not easy, its not hard, but it is doable. again, try the electrical section.

 

Thanks for the info.

 

Its actually not that hard to do it at all, if its anything like mine. I have a 98 F150 so im not quite sure if its the same, but all i had to do was pop off the part where the buttons are and take out the switch and replace it.

It would help also if you could get some pics.(if you can,if cant dont worry)

 

Here are a couple on eBay for cheap. Make sure this is the one your truck's driver-side switch setup uses. It isnt hard at all to do.

http://cgi.ebay.com/ebaymotors/04-07...QQcmdZViewItem

http://cgi.ebay.com/ebaymotors/04-07...spagenameZWDVW