I bought a 2007 full floor console off ebay last night for my 2006 F150 XLT 4x4. Will it line up with the holes if I have the 40/20/40 front seats?

 

Should line up, but you may need a new front bracket.. You talking about the console that replaces the jump seat but does not have the shifter??

I think they bolt on the same as the shifter console, if that is the case you will need a new bracket, but I'm not 100% sure on that console..

 

I took out the 40/20/40 seat out of my 07, and installed an xlt console that I bought off of ebay. All the holes lined up perfect, the only thing I had to buy was a few washers from the hardware store.

 

Motoxer,

Which console was it? Was it about 12" wide, 16" high and 29" long or so? Do you have pics?

 

there are only 3 options

1) the 40/20/40 which isnt really a console

2) the xlt console which doesn not have the shifter

3) the flow through which does have the shifter(or at least a hole for one, being that most of the time it doesnt come with the shifter) and also goes all the way to the dash but requires either a flow through dash or some custom adapters

 

Yeah, I knew those options. I thought there might be another XLT console that is not quite as long, but I think that was for the 04 and earlier. I have one that is long and skinny and has cup holders - definately not the flow through. I hope it works out... I hate that center jump seat...