Rattle Over Bumps

Old Jan 10, 2008 | 11:43 AM
  #1  
pkp190's Avatar
Thread Starter
|
Member
Joined: May 2007
Posts: 19
Likes: 0
From: TX
Rattle Over Bumps

All i have a bit of a wierd sound coming from the back of my screw when i go over some bumps. It sounds like the back window, which i have the sliding one, is moving. I can feel that it is solid and not moving freely in place at stop. Any advise on where to look to stop this. TIA
 
Reply
Old Jan 10, 2008 | 12:15 PM
  #2  
knighj1's Avatar
Senior Member
Joined: Apr 2007
Posts: 766
Likes: 0
From: Auburn, AL
not to jump your thread, but I also have a '07 and a rattle coming from the passenger side door area, I have removed door panel and tried to fix what I thought it was, but it still rattles over bumps, good luck with the rear window
 
Reply
Old Jan 10, 2008 | 03:09 PM
  #3  
n8er00's Avatar
Member
Joined: Feb 2007
Posts: 81
Likes: 0
From: Maine
Originally Posted by pkp190
All i have a bit of a wierd sound coming from the back of my screw when i go over some bumps. It sounds like the back window, which i have the sliding one, is moving. I can feel that it is solid and not moving freely in place at stop. Any advise on where to look to stop this. TIA
I had a rattle in the rear door of my SCab whenever I would hit a bump. Turns out that it was the sound dampening material that was coming off the inside of my door. It had fallen off and was loose inside the door panel. I just removed all the pieces and rattle is gone. I'll eventually be re-spraying it.
 
Reply


Thread Tools
Search this Thread

All times are GMT -4. The time now is 06:22 AM.