Swap Buckets for a bench

Thread Tools
 
Search this Thread
 
Old Nov 15, 2005 | 10:45 AM
  #1  
Thelt's Avatar
Thread Starter
|
Member
Joined: Oct 2005
Posts: 52
Likes: 0
From: Lenoir, NC
Swap Buckets for a bench

I have an '89 F150 extra cab with two captains chairs and a small rear bench seat. I would rather have a bench up front so I can seat six people. Does anyone now if Ford made a bench that would fit and also fold to allow access to the rear seats and if so what years would fit my truck?
 
Reply
Old Nov 19, 2005 | 10:05 AM
  #2  
crazynip's Avatar
Senior Member
Joined: Nov 2005
Posts: 1,194
Likes: 5
From: Florida
I dont think ford ever put a bench seat in the supercab just for this reason, there would be no easy way to access the back seats
 
Reply
Old Nov 20, 2005 | 02:14 AM
  #3  
Photog95's Avatar
Member
Joined: Sep 2005
Posts: 66
Likes: 0
From: Wisconsin
My 95 has a bench seat and I will say it is a pain to get kids in the back seat and it really suck if you are an adult.
 
Reply
Old Nov 22, 2005 | 12:03 AM
  #4  
uknigel2's Avatar
Senior Member
Joined: Aug 2005
Posts: 158
Likes: 0
Ford did have a bench seat for the supercab f150 in 89. The backs folded at an angle across the front seat. Good luck finding a good unit but they can be recovered.
 
Reply
Old Nov 30, 2005 | 09:47 PM
  #5  
fordtough_k_w's Avatar
Senior Member
Joined: Mar 2005
Posts: 254
Likes: 0
From: Michigan
i can imagin that one out of a single cab truck would work, as much as i hate to say it you might check a chevy truck a lot of those have bench style seats that have a middle that folds down like a armrest. one of those could be made to fit if had be
 
Reply




All times are GMT -4. The time now is 05:50 PM.