F150online Forums
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

F150online Forums (https://www.f150online.com/forums/)
-   Illumination & Lighting (https://www.f150online.com/forums/illumination-lighting-131/)
-   -   Fog Light Socket (https://www.f150online.com/forums/illumination-lighting/509110-fog-light-socket.html)

thelariat02 03-04-2016 08:37 PM
Was hoping someone with aHD or STX would have commented by now.
Get a 9145 or 9005 plug from auto zone plug and see if it fits in there. If it does there ya go..
But how's the output? It just doesn't seem right

xJohn.Spartanx 03-04-2016 08:39 PM
Originally Posted by thelariat02 (Post 5185607)
Was hoping someone with aHD or STX would have commented by now.
Get a 9145 or 9005 plug from auto zone plug and see if it fits in there. If it does there ya go..
But how's the output? It just doesn't seem right
Output is great. Looks good. I'll go check on those two right now.

thelariat02 03-04-2016 08:56 PM
Ok was just curious since that bulb is really weird looking

xJohn.Spartanx 03-04-2016 10:00 PM
Originally Posted by thelariat02 (Post 5185610)
Ok was just curious since that bulb is really weird looking
Ok, negative....but something interesting. That socket is connected to an adapter that connects to the original harness. Once I removed that, a 9140 socket bulb worked and turned on but guess what? The bulb was too fat and didn't fit in the housing...needs an H1 size bulb....so now what? Lol

thelariat02 03-04-2016 10:04 PM
At this point I'm at a lost haha. Cause I have no idea what the bulb you posted a picture of is. The 90° connector is not something a H1 or H3 have

xJohn.Spartanx 03-04-2016 10:11 PM
Originally Posted by thelariat02 (Post 5185615)
At this point I'm at a lost haha. Cause I have no idea what the bulb you posted a picture of is. The 90° connector is not something a H1 or H3 have
Yeah, I know man. The guy at auto zone was opening packages and trying them...lol. Thanks for your help anyway bro.

thelariat02 03-04-2016 10:27 PM
No problem. I even was searching on line. I can't find them.

xJohn.Spartanx 03-04-2016 10:36 PM
Originally Posted by thelariat02 (Post 5185617)
No problem. I even was searching on line. I can't find them.
Me too...I've looked just about everywhere. Quirk parts sent me the socket and pigtail but I can't get a hold of them to see if they can send me another. I'll try again Monday.

07massHD 03-04-2016 10:44 PM
I have never seen a bulb like the one you have.
Have you looked for new housing?

xJohn.Spartanx 03-04-2016 10:46 PM
Originally Posted by 07massHD (Post 5185619)
I have never seen a bulb like the one you have.
I have an 07 Harley with the round dog light housing. I had the same 90* bulb. I got rid of the factory ones and put a set of LEDs in. And then last week I upgraded to the Morimoto fogs from the retrofit.
What are you looking for. New bulbs or a plug?
Yeah apparently nobody has seen them but my truck has them. It's an H1 bulb with the above socket. I need that socket. The 90.

Patman 03-04-2016 11:01 PM
I know my XLT was prewired for fogs from the factory, when I did have Harley fogs I had to change pigtails, not sure about bulb numbers.

Best of luck

xJohn.Spartanx 03-04-2016 11:09 PM
Originally Posted by Patman (Post 5185621)
I know my XLT was prewired for fogs from the factory, when I did have Harley fogs I had to change pigtails, not sure about bulb numbers.

Best of luck
Thx man...I can remove the pigtail and have the factory harness that uses a 9140 connector but the bulb is too fat...doesn't fit

2stroked 03-05-2016 12:32 PM
Have you by chance tried a Ford dealer?

xJohn.Spartanx 03-05-2016 07:06 PM
Originally Posted by 2stroked (Post 5185650)
Have you by chance tried a Ford dealer?
Yes, I have a friend that works for Ford...he's looking too.


All times are GMT -4. The time now is 04:20 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands